Recent content by DaIPOTek

You need to add the SIP FQDN and Domain to the config. You can use just the IP address one the IPO LAN1 in those fields if you'd like. You won't get anything to register without something configured there.

Random reboots have been present in many different builds over the years with various causes. There are no historical logs you can review. Best to set a sysmon trace to log and check it after the next reboot.

Try sending the calls to a short code where you set the Locale to Spanish. Never had to do it so not sure if it will work but its worth a shot.

Had the same problem. Ended up disabling referred authentication as a temporary workaround. Not the best fix but it got me going.

Browse to https://[IP OFFICE ADDRESS]:7071 to ignite it.

You can go directly to 11. Just make sure you have a good backup.

I won't even attempt UC Module upgrades anymore, I always just take a backup and do a full re-image then restore the backup. You do need to be on site to do that with a USB drive. The best way to upgrade though is to spin up an App server and ditch the UCM.

Anyone experienced the same audio issues on the J series phones on this release and/or know if there is a patched firmware for them?

Avaya has a patched bin file that fixes this. You have to open a support ticket to get it. Installing is easy it only takes a couple minutes.

Known issue in R11.0.4.1. Follow the instructions here or do an SD card recreate. https://support.avaya.com/ext/index?page=content&id=SOLN342353

If its Windows VM Pro you can use a free utility called WinDirStat to visually show you whats taking up all that space.

I've got the exact same issue. iPhone doesn't have the Voip service limited warning but Android does connected to the same IPO. I have tried with and without TLS, no difference. I'm not sure what exactly is limited since it seems to be working 100% fine other than the warning icon.

This is how we do our customer demos. Works well. Get a cheap wireless router so you can show Equinox on mobile too.

Yep you've got it. It will use that as long as there isn't a better match.

Had this happen before. You should be able to upload through Web Manager no problem. If all else fails you can rename the PLDS license file to PLDSKeys.xml, upload to the Primary folder with Embedded File Management, and restart the SD card.