Recent content by chevyman1

I realize that the AUX port is for analog devices, but you cannot use the phone when you are using those devices. CC machine, fax, etc?

I am out of station ports, how can I install a fax into the system? Can I use the AUX port with the phone with the intent on users cannot use the telephone during a fax?

Hi, It has been my understanding that I can use the AUX port next to the line port for analog devices. I plugged in a fax machine into the AUX port, came off hook with the handset and drew dial tone on Line 1. Then I sent a fax, the fax machine tried to draw dial tone but landed on the line 1...

Hunt groups are circular. The 1st call will go to the lowest numbered extension. Subsequent calls go the extension AFTER the one that answered the last call. What happens to the extension when he or she with the lowest numbered extension hangs up. Do the next incoming calls go around in a...

I would like to make Extension 10 take all calls after being transferred by the voice mail system. If the Voice Mail System transfers the first call to Ext 10 and a second caller is transferred to Ext 10, what happens. Can I set it up that all calls come to Ext 10 only. I have a Partner R4.0...

Are you saying that it will power up without the primary processor. I was lead to believe that the primary processor had to send a command by way of the interface cable to turn it on. Can I plug a power cord directly to the expansion processor?

I have an expansion processor that won't power up. I powered up the expansion carrier first, then the primary cabinet second. The LEDs on the expansion processor come on for fifteen seconds and then go off. I have a full compliment of modules in the primary cabinet, a 206 (that test good) in...

Thank you syquest. Should I put them in a Hunt Group or a calling group and why?

A medical clinic. Five incoming lines, five call takers, ext 10, 12, 14,16 and 18. I would like them to take incoming calls one a time (as directed by the voice mail system, (push 6 to make an appointment)) spread over the five extensions. If all call takers are tied up with the five incoming...

A medical clinic. Five incoming lines, five call takers, ext 10, 12, 14,16 and 18. I would like them to take incoming calls one a time (as directed by the voice mail system, (push 6 to make an appointment)) spread over the five extensions. If all call takers are tied up with the five incoming...

The card I have says Remote Access PC Card. I checked it using procedure #124, as it turns out it has back up capability. I did not realize this until I removed it. I than got a backup failure message at Extention 10. You learn something every day.

If I have a group of five call takers, is it better to put the five call takers (extensions) in a Hunt group or a calling group? Then assign a selector code to get to the group?

I am still confused about the relationship between selector codes and range of extensions. Can you please elborate a little on this relationship?

I would like to create an Extension Hunt Group. I would like to have a selector code ring into that group from the outside. Three questions, first the first extension that I put into the group will be the first that receives the call followed by the subsequent extensions, ie, first listed...

I'm confused about Selector codes. The book has the range of extensions for selector code 1 as 10-19, 20-29 for selector code 2, et cetera. What is the relationship between selector codes and range of extensions? I have a client with a Partner II, he has enough 206 modules to go out to extension...