WinFiol cancel command

[danlilea]

Hello,

Is there any way to cancel an command that was send to the PBX and which was wrong, as the PBX don't provide an error or syntax error. Any cancel operation other than break and reconect.

Thanks.

 

[himdp]

If the command is wrong with a syntax error, the PBX does give a message!
If the command is OK and executes, then you can undo it by performing a data reload or input a command which reverses the action.

 

[danlilea]

I meant if the command is written wrong with no syntax error like an command without ;

 

[doktor]

CTRL+B or CTRL+F in TTY mode will it.

///doktor

 

[danlilea]

Ctrl+B Select all text from cursor position

Ctrl+F Find a string

That's in WinFiol HELP shortcuts

 

[doktor]

If you have sent e.g. a printout command giving a very long printout this printout can be interupted by:
CTRL+B pauses the printout or CTRL+F "kills" the printing job - but it has to be in TTY mode .
Other commands may be interupted by CTRL+F.

///doktor

 

[himdp]

That would be control+X F;
and control+X B;

 

[danlilea]

thank you very much

 

[doktor]

Right, himdp.
Must have been too long since I used it.
The correct ´syntax is:
That would be control+X F;
and control+X B;


///doktor