Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dusyi command fails 2

Status
Not open for further replies.

msubhan

Programmer
Jun 16, 2014
79
SA
Hi Experts
When i give command DUSYI at last gives out put failed in lim2 FAM2.P so what i to do. When power failure occurs all the programming goes to the previous state MD110 BC12.Please i will be grateful to your precarious help. Thanks all experts.
 
if you do not have a valid backup you cannot reload the system.
I would try a RFEXI; first (this will only reset the system, not reload from disk)
if that does not work, you have 2 options:
- make cust.dat (basically print out the entire configuration) and rebuild the system from scratch
- hire someone to solve the data corruption (can't help you with that)

are you 100% sure you do not have a valid external backup? (post the printout of DUBDP; plz)

Best regards,

-----------------------------------------------------
Helping people is my job...
 
To Sir Mr Whosrdaddy . Thank you very much for your valuable help. As per your kind instructios the following result of DUBDP Command is posted. Please guide me can i make a reload from this backup. Thanks again for your valuable help.

<DUBDP;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL2 REL1
10:38 24APR10 NOT VALID
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 10:38 24APR10 13:33 12JUN22
2 10:38 24APR10 13:33 12JUN22

STANDBY SIDE
DIVERGENT TIME AND DATE LIM 1 10:38 24APR10 16:28 09JUN22

 
Hi Sir Mr Whosrdaddy waiting for your kind help the company do not want to hire some one but if you can solve the problem. The payment will be paid to you.Sir can you check the system via any desk or team viewer. Thank you very much for your kind help.
 
Hi experts The company need urgent repair of pabx. The payment will paid so any one may please give his email address.
Thanks for your kind consideration .
 
Good afternoon.
You have a difficult situation with equipment that no one will solve remotely. Most likely, you will need to save all the data and then install the station with INL. This requires a personal presence at the facility. Look for a specialist in your area.
Or study the documentation and do all the work yourself. You need to have a license file and INL with your regional data.
 
Thank you sir kfor your reply we contact with Ericsson company and they will come on site tomorrow. Thanks all for their valuable helots. Good night
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top