Valcom V-2901A UNIVERSAL DOOR ANSWERING SYSTEM

[DUCKDIAZ]

Avaya IP Office essential edition Ver 9.0.5.0 R.9.0
Using Valcom V-2901A UNIVERSAL DOOR ANSWERING SYSTEM

I have the Tip Ring from the valcom going into analog CO port 4 on the Avaya.

In LINE programming of the Avaya UI I changed the Incoming AND Outgoing group ID to 1 (LINE ID 702)

On a 1416 digital station button programming tab I assign
ACTION: "LINE APPEARANCE"
ACTION DATA: 702 IMMEDIATE

Now when someone pushes the button AT THE DOOR the phone will NOT RING, it ONLY illuminates the digital station button you can answer it, talk AND release the DOOR.

It Just wont RING, im going NUCK-N-FUTZ!!! HELP!!!!,

 

[Telecomboy]

Is the Co line set to loop start (versus Loop start caller id)?

 

[DUCKDIAZ]

I tried both with no luck...

 

[Westi]

You still need an incoming call route otherwise it won't ring. Avaya special

Joe W.

FHandw, ACSS (SME), expired ACIS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[DUCKDIAZ]

How do I Call route to a line appearance button?

 

[pmcook]

If you specify line group ID 1 in the ICR route and the destination extension or HG you desire it should ring an LA if one is present for line 702 because 72 is a member of LG 1.