Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valcom V-2901A UNIVERSAL DOOR ANSWERING SYSTEM

Status
Not open for further replies.

DUCKDIAZ

IS-IT--Management
Feb 19, 2015
5
US
Avaya IP Office essential edition Ver 9.0.5.0 R.9.0
Using Valcom V-2901A UNIVERSAL DOOR ANSWERING SYSTEM

I have the Tip Ring from the valcom going into analog CO port 4 on the Avaya.

In LINE programming of the Avaya UI I changed the Incoming AND Outgoing group ID to 1 (LINE ID 702)

On a 1416 digital station button programming tab I assign
ACTION: "LINE APPEARANCE"
ACTION DATA: 702 IMMEDIATE

Now when someone pushes the button AT THE DOOR the phone will NOT RING, it ONLY illuminates the digital station button you can answer it, talk AND release the DOOR.

It Just wont RING, im going NUCK-N-FUTZ!!! HELP!!!!,
 
You still need an incoming call route otherwise it won't ring. Avaya special :)

Joe W.

FHandw, ACSS (SME), expired ACIS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
How do I Call route to a line appearance button?
 
If you specify line group ID 1 in the ICR route and the destination extension or HG you desire it should ring an LA if one is present for line 702 because 72 is a member of LG 1.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top