Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using Polycom SIP phone features on IP Office 6

Status
Not open for further replies.

dsimmonsart

IS-IT--Management
Feb 10, 2010
13
US
I want to use the feature buttons on Polycom phones, transfer from phone to phone etc. Does anyone know how to make this happen. As of now I can only answer calls. Model SoundPoint IP 430 SIP
 
Call wating" (User > Telephony tab > Multiline) ticked on the user?

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
Not Multi-Line but Call setting tab.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
post your email address, i have a document for getting polycoms working very well on the IP office. There is no way to get the features key (the blue one) working (that i could find) but i got all other transfer keys etc working well.


ACSS-SME
fo shizzle ma nizzle.
 
thanks for the star. To be honest, a lot of it is common sense and could be applied to any sip endpoint, there were only one or two settings that were tricky, one being the time server, when it didn't have a time server it was acting a bit strange.

ACSS-SME
fo shizzle ma nizzle.
 
can i have a copy of that document also Tom if you dont mind. can i post my email add here?
 
Tom send me the document I work with dsimmons, bricherson@choicesolutions.com

ACA - Implement IP Office
ACS - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
I'd like it too if you don't mind.

hnet382 at hotmail dot com
 
Thanks for the info folks. I received the doc through djuplift via amriddle01 via TomMills if I followed that correctly...been out of he loop for a couple days. Thanks to all.
 
OK how do i complete a Transfer on these phones having no luck?

ACA - Implement IP Office
ACS - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
NVM I got it..

ACA - Implement IP Office
ACS - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
er...psst....f.a.q.

Use system monitor unless of course you are a Tard then it IS the fault of the pbx.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top