Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using Multitech FF840

Status
Not open for further replies.

tekguy125

Technical User
Feb 16, 2006
89
US
Looking to use the Multitech FF840 with IP Office. Does anyone know how to default it if you don't have the admin password? I made a console cable from some instructions I found on the Multitech website, I'm able to Putty into the console port and I am able to browse to the unit in a web browser but don't know the admin credentials. Any help would be appreciated.
Thanks
 
there is a reset button on the chassis
have you tried pushing it and holding it for a while, then if that doesn't work pushing it while it boots up

Joe
FHandw, ACSS (SME)

Remembering intrigrant 2019
 
Thanks for the idea Westi, unfortunately the reset button doesn't do anything except reboot the module, I've tried holding it down for various lengths of time and while it was booting up.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top