I have a Logitech USB Cordless Mouse on my XP system. It was plugged into one of the two USB ports on the motherboard, but I moved it to one of the three ports on the USB Hub (Adaptec AUA-3100LP, 3 ports). Now the mouse is unseen.
When I enter the Device Manager and "Scan for hardware changes" on the USB controller, the mouse works. Reboot and I have to scan again.
Unplug/replug the mouse from the hub port, it works.
I plugged the mouse into the original port, uninstalled, plugged it into the new port, works. Reboot and nothing.
I plugged the mouse into the original port, uninstalled, rebooted, plugged it into the new port, works. Reboot and nothing.
Any ideas how I can get the device moved?
Under "Universal Serial Bus Controllers" I have listed:
NEC PCI to USB Enhanced Controller (B1)
NEC PCI to USB Open Host Controller [2 times]
USB Root Hub [5 times]
VIA Rev 5 or later USP Universal Host Controller [twice]
Thanks,
Walt
When I enter the Device Manager and "Scan for hardware changes" on the USB controller, the mouse works. Reboot and I have to scan again.
Unplug/replug the mouse from the hub port, it works.
I plugged the mouse into the original port, uninstalled, plugged it into the new port, works. Reboot and nothing.
I plugged the mouse into the original port, uninstalled, rebooted, plugged it into the new port, works. Reboot and nothing.
Any ideas how I can get the device moved?
Under "Universal Serial Bus Controllers" I have listed:
NEC PCI to USB Enhanced Controller (B1)
NEC PCI to USB Open Host Controller [2 times]
USB Root Hub [5 times]
VIA Rev 5 or later USP Universal Host Controller [twice]
Thanks,
Walt