Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Upgrade 6.3 to 7.4 sp2

Status
Not open for further replies.

LuigiEspo

Technical User
Jul 18, 2014
59
IT
good evening everyone

, I upgraded a Mitel MXONE telephone exchange from 6.3 to 7.4sp2 by replacing the ASU-II and installing the ASU-III. The control unit is equipped with LIM1+Cluster LIM2 in another site. The control unit has 1000 VoIP terminals registered to it, both on lim 1 and on lim 2. It happens to me that it suddenly reloads and causes me a disruption of about 10/20 seconds. the voip terminals are in dhcp , the dhcp is managed by the asu itself via yast2. Is there no way to see the logs of the control panel and understand why it reloads?

might think there was some duplicate IP address but I'm not sure.

How can I see the logs of the MXONE.
Please Help Me
 
 https://files.engineering.com/getfile.aspx?folder=3ca15ad6-3dca-4b40-8815-7eae715efc4a&file=alarm_-p.txt
Hello LuigiEspo!

The command alarm -p -f detail can give you more details for each alarm. Also, you can see at /var/log/messages in each LIM to search for more information.

BR,
Edgar

BR,
Edgar
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top