Update IPO 3.1.48 -> 3.2.65

[TeleKing]

Hello can anybody write the steps for a Update from 3.1.48 -> 3.2.65.
I have 406V1 system.

 

[tlpeter]

Look on the admin software
There is a folder "bin"
In there you see a folder 406v1
In there there is a bin file

Point your working directory's to there
Upgrade to that verison

After that change your working directory's back
Then upgrade again

You need this boot loader first



ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[Westi]

http://support.avaya.com/elmodocs2/ip_office/R3.2/IPOffice3_2GA_Tech_Bulletin.pdf

this is the bulletin for the 3.2 GA it contains the steps for the upgrade, I can't remember them either and have to look it up every time.

Cheers

Joe W.

FHandw., ACS

If you can't be good, be good at it!

 

[TeleKing]

Thanks Peter,
can I go direct to 3.2.65 or need it 3.1.999
Avaya write I must first go to 3.1.65. I don´t understand this Step.

 

[tlpeter]

you do not need 3.1.65
Use the bin file in the 406v1 folder
This will do the same as upgrading to 3.1.65


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[NYSTECH]

tlpeter is right. upgrade to .99 file 1st then 3.2.65

ACS- IPOffice Implement