tty port

[Dodgerphil]

I'm trying to program a TTY port 6, on an opt 81, to as a CDR. I keep getting an error message SCH5576
Invalid device number - may conflict with already existing ADAN device
number. But there is not another port programmed and a CDR port. There was a CDR on TTY port 5 but it has been deleted so TTY port 6 can be programmed and the CDR port. Any thought on what i may be missing?

Thanks

 

[bignose21]

LD 22
REQ prt
Type adan

Is there anything against 6 TTY, DCH etc

 

[Dodgerphil]

No. 6 is unequipped. There are 2 other ports programmed as XSDI ports but they are for a WYSE termianl and system monitor.

 

[Firebird Scrambler]

Can you print off all the CFN data in LD 22 please. As stated above, it might still be a conflict such as PTY, AML, etc.

also check if any other areas such as ELAN exist.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[Dodgerphil]

I will try your suggestions. Thanks for the tips.