Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

tty port

Status
Not open for further replies.

Dodgerphil

Technical User
Jun 12, 2015
8
US
I'm trying to program a TTY port 6, on an opt 81, to as a CDR. I keep getting an error message SCH5576
Invalid device number - may conflict with already existing ADAN device
number. But there is not another port programmed and a CDR port. There was a CDR on TTY port 5 but it has been deleted so TTY port 6 can be programmed and the CDR port. Any thought on what i may be missing?

Thanks
 
LD 22
REQ prt
Type adan

Is there anything against 6 TTY, DCH etc
 
No. 6 is unequipped. There are 2 other ports programmed as XSDI ports but they are for a WYSE termianl and system monitor.
 
Can you print off all the CFN data in LD 22 please. As stated above, it might still be a conflict such as PTY, AML, etc.

also check if any other areas such as ELAN exist.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
I will try your suggestions. Thanks for the tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top