Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trying to Fax via SCN (Is it possible?)

Status
Not open for further replies.
cj26

cj26

Systems Engineer
Jun 1, 2018
26
US
Hello,

Thank you in advance for any help you can give, much appreciated.

So I have 2 sites (Main & Backup)
The Main site has SIP Service the backup site has no telco service.

There is a SCN configured between sites so the Backup site can log in to the phone and make calls across the SCN and out the SIP trunk at the main site.

I am having trouble setting up a FAX machine at the backup site and having it work over the SCN. I do not have much experience with fax machines to start but I have tried everything I can think of and am spinning my wheels.

I have a combo card installed at the backup site and the fax machine is plugged into port 8 (Analog Station) and set as a FAX.
I have dial tone at the Fax.

When I go to dial out It starts to go then get the busy signal. I have attached a quick sketch for reference of what I am trying to achieve.

I am having issues actually dialing out, not sure if there is something that needs to change with the SCN or what.

I have the same thing set up at the Main office pretty much with a fax machine and it works, the only difference here is the SCN.

Any ideas? Any more information needed?

Let me know - Thank you.
 
 https://files.engineering.com/getfile.aspx?folder=ad08c54f-d01e-435b-9f01-93f1c4ca510a&file=Fax_Issues.jpg
Sort by date Sort by votes
Fax_Issues_sxygwd.jpg
 
Upvote 0 Downvote
Upvote 0 Downvote
@derfloh See attached, we use 8 as our prefix to dial out


BackupOffice_SCN_m5pxa4.jpg

BackupOffice_SCN2_g1qpp9.jpg

BackupOffice_SCN3_nvt6rt.jpg
 
Upvote 0 Downvote
Upvote 0 Downvote
Hi again @derfloh, see below

Backup Office:

BackupOffice_SCNLineToMain_pvsrou.jpg


Main Office:

MainOffice_SCNLineToBackup_z6icz9.jpg
 
Upvote 0 Downvote
Since the SCN line group on the backup office site is 21 you have to use it in you short code. So 8N/Dial/8N/21 would be correct. You also have to assure that you have an 8N system short code on the main office site as well.

IP Office remote service Fixed price SIP trunk configuration: CLI based cale blocking: SCN fallback over PSTN:
 
Upvote 0 Downvote
@derfloh I will make that change tonight to see if it resolves some issues. Don't want to knock anyone offline right now - I will let you know in AM the results. Thank you!
 
Upvote 0 Downvote
Allso ensure you have Fax support enabled on the SCN trunk!



Do things on the cheap & it will cost you dear
 
Upvote 0 Downvote
So now I’m able to receive faxes but when trying to fax I always get “no fax answer”
 
Upvote 0 Downvote
Upvote 0 Downvote
From the fax machine I have it set to use 8 as a prefix then dial

From the same line I can dial a number with a buttset

Only short code is 8N / N / Dial
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lleeNC
  • Locked
  • Question
Paging over SCN issue 1
Replies
2
Views
181
lleeNC
lleeNC
S
  • Locked
  • Question
Real-time speech to text via Avaya Agent?
Replies
4
Views
345
sizbut
sizbut
IamaSherpa
  • Locked
  • Question
SCN failover dialing 1
Replies
2
Views
159
TomMills
TomMills
GillockLaw
  • Locked
  • Question
BOOTP what is it and what does it do? 3
Replies
1
Views
109
sizbut
sizbut
Rhinorhino
  • Locked
  • Question
MOH across SCN 2
Replies
3
Views
187
nnaarrnn
nnaarrnn

Part and Inventory Search

Sponsor

Back
Top