Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SX-200 CXi Controller will not boot up
- Thread starter 2400tec
- Start date
connect a computer running terminal emulation VT100 to the RS232 port on the controller. 9600 8-1-N. As the controller boots you will see the boot sequence. when prompted hit the space bar 3 times the boot sequence will stop. Type "C" for boot change. Using the ENTER key the boot line will display a line at a time. *ost the results here and we will help you.
NO GOOD DEED GOES UNPUNISHED!
NO GOOD DEED GOES UNPUNISHED!
- Thread starter
- #3
Here they are
boot device : ata=auto0
processor number : 0
host name :
file name : /partition1/Kts8250.vx
inet on ethernet (e) : 192.168.22.2
inet on backplane (b):
host inet (h) : 192.168.17.31
gateway inet (g) : 192.168.17.1
user (u) : ftp
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : motfcc
I would like to be able to get this back to default.
Thanks in advance
boot device : ata=auto0
processor number : 0
host name :
file name : /partition1/Kts8250.vx
inet on ethernet (e) : 192.168.22.2
inet on backplane (b):
host inet (h) : 192.168.17.31
gateway inet (g) : 192.168.17.1
user (u) : ftp
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : motfcc
I would like to be able to get this back to default.
Thanks in advance
IrwinMFletcher
Programmer
looks fine, the bootline rarely gets out of wack, unless it was during an upgrade.
let the box continue to boot and post the output from the serial port.
let the box continue to boot and post the output from the serial port.
- Thread starter
- #5
Here it is
Starting at 0x10000...
Last reset cause was (0x13) CHECK_STOP_RESET
VxWorks
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Runtime Name: VxWorks
Runtime Version: 5.5.1
BSP version: 2.1/1
Created: May 7 2008, 11:52:19
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Executing S10startup script
Disable L2 Switch ports 1-16
VMLangFormat: Not able to load "en" language format.
18/08/2009 06:22:00> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(57)
PostSoftwareLogA: Called before calling OtpLogStartup
18/08/2009 06:22:00> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 0
18/08/2009 06:22:00> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 2
relink_call_ctors start
relink_call_ctors done
volume descriptor ptr (pVolDesc): 0xf167e28
cache block I/O descriptor ptr (cbio): 0xf3e8138
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 1
# of different files in use: 1
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /sysro ; (in boot sector: )
- volume Id: 0x1b6f17e8
- total number of sectors: 117,344
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 230
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 493
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 461
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 6 clusters
- free space on volume: 2,015,232 bytes
volume descriptor ptr (pVolDesc): 0xf165b80
cache block I/O descriptor ptr (cbio): 0xf1e7f60
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /db ; (in boot sector: )
- volume Id: 0x3620000
- total number of sectors: 14,976
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 30
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 93
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 61
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 1 clusters
- free space on volume: 3,509,248 bytes
volume descriptor ptr (pVolDesc): 0xf1638d8
cache block I/O descriptor ptr (cbio): 0xf167ed0
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /vmail ; (in boot sector: )
- volume Id: 0x3a00000
- total number of sectors: 369,408
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 181
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 395
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 363
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 5 clusters
- free space on volume: 167,522,304 bytes
18/08/2009 06:22:03> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(600)
OtpLogStartup: Log server already started. Request ignored.
OtpLogs_Toggle: The following software logs are enabled:
ERROR & WARNING
OtpMaintenanceLogs_Toggle: The following maintenance logs are enabled:
ERROR & WARNING & INFO
MiSslInit(): entry
MiSeedRand(): Start RandStatus = 0
MiSeedRand(): End RandStatus = 1
DSC:
rocessArguments - (option -debug)
Debug level set to level 0 -> OSA_ERROR_SEVERITY
SysServices::appStartup: Logs to be redirected to DataServices!
System wide Component Monitoring is DISABLED.
Current system reset mode: [0]
ResourceAlarmStartup ready.
Compact Flash DS Servant SUCCESSFULLY started.
C O M P A C T F L A S H S T A T U S
Compact Flash Present = FALSE
Compact Flash Event Count = 0
Compact Flash Led Colour = OUT
Compact Flash DS Client SUCCESSFULLY started.
ManagementLayerCoordinator::StartUp(): Logs to be redirected to DataServices!
deleting file /db/database/sx200dba_db/sysConf.db
deleting file /db/database/__db.001
Berkeley DB: /db/database/sx200dba_db/sysConf.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/cctdesc.db
Berkeley DB: /db/database/sx200dba_db/cctdesc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/trkAssg.db
Berkeley DB: /db/database/sx200dba_db/trkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/t1lnkdsc.db
Berkeley DB: /db/database/sx200dba_db/t1lnkdsc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/linkAssg.db
Berkeley DB: /db/database/sx200dba_db/linkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/prilnkcf.db
Berkeley DB: /db/database/sx200dba_db/prilnkcf.db: S_dosFsLib_FILE_NOT_FOUND
/db/database/files/200plcfg.db
Management Layer Coordinator SUCCESSFULLY started.
adding names to certificate
added CN = mitel networks sx-200 icp web server
added CN = vxtarget
added CN = 192.168.17.31
added CN = 192.168.22.2
added CN = 192.168.1.2
cert modified
Database verification passed: /db/ipndb/odb/files/MitelDhcpClientEntry.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerGeneral.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerSubnet.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerRange.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerStaticIp.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerOption.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerLease.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpFilter.wdb
Database verification passed: /db/ipndb/odb/files/MitelFltGrpAccessRestrict.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSLan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSWan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSPptp.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwitch.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwGrpPort.wdb
Database verification passed: /db/ipndb/odb/files/MitelPPPGrpPPPoE.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpLogGrpLog.wdb
Database verification passed: /db/ipndb/odb/files/PppSecuritySecretsTable.wdb
Database verification passed: /db/ipndb/odb/files/IpCidrRouteTable.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpDns.wdb
Database verification passed: /db/ipndb/odb/files/MitelDiffServ.wdb
0x2b20800 (tAppStartup): Error encountered with IP Networking database. Verify IP Networking configuration.
0x2b20800 (tAppStartup): ** IPN CDE Server Start **
Start DHCP service
MCC initializing with ST TDM Bus connectivity @ 2Mbs.
0x2b20800 (tAppStartup):
DW pool created with 2560 buffers, platform: 64
Initialized and enabled Mcc2.
-----> Mitel E2T initializing <-----
E2T Startup: E2T IP address = 192.168.22.2
E2T Startup: RTC IP address = 192.168.22.2
Stream_T2E_Startup, binding 64 RTP ports (even ports) in the range of 50000 to 50126
There were 64 UDP ports created.
Stream_T2E_Startup, binding 64 RTCP ports (odd ports) in the range of 50001 to 50127
There were 64 RTCP ports created.
tMediaControl E2t<->E2tProxy MCT communications established
E2T Startup: TDM codec is U_LAW_CODEC
Dsp List Filename: "/sysro/DspConfig/dsplist.txt"
Dsp Config Filename: "/sysro/DspConfig/dspConfig3XXX.txt"
Dsp Card Type Filename: "/sysro/DspConfig/DspCardType.txt"
Dsp Type Filename: "/sysro/DspConfig/DspTypeEmerald.txt"
Dsp Static Loading Filename: "/sysro/DspConfig/loading3XXX.txt"
MITEL SYSTEM ROM R2.1/1 Aug 16 2006 (13)
CCA Number : 56005083 RC.10
System Model : 004f0000 F64
CPU Model : 8270 R0a10
Reset Config : 04043246
Bus Clock (MHz) : 66
CPM Clock (MHz) : 165
Core Clock (MHz) : 264
Internal Memory Map : f0000000
Main Memory (MB) : 256
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f14979e
L2 Switch : 1
Embedded VEC : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Programming FPGA...
Design Name : MN
MITEL SYSTEM ROM R2.1/1 Aug 16 2006 (83)
CCA Number : 56005083 RC.10
System Model : 004f0000 F64
CPU Model : 8270 R0a10
Reset Config : 04043246
Bus Clock (MHz) : 66
CPM Clock (MHz) : 165
Core Clock (MHz) : 264
Internal Memory Map : f0000000
Main Memory (MB) : 256
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f14979e
L2 Switch : 1
Embedded VEC : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Programming FPGA...
Design Name : MN3XXX_LOGIC.ncd
Xilinx Part : 2s300efg456
Build Date : 2004/07/21
Build Time : 13:09:34
Byte Count : 234456
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
SDRAM CS1 March Test........................ PASSED
SDRAM CS2 March Test........................ PASSED
Starting vxWorks...
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Version: VxWorks5.5.1
BSP version: 2.1/1
Creation date: Aug 16 2006, 15:48:30
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : ata=auto
unit number : 0
processor number : 0
file name : /partition1/Kts8250.vx
inet on ethernet (e) : 192.168.22.2
host inet (h) : 192.168.17.31
gateway inet (g) : 192.168.17.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : motfcc
Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/ata00) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/ata00) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /ata00/Kts8250.vx...43039424
Starting at 0x10000...
Last reset cause was (0x83) POWER_ON_RESET
VxWorks
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Runtime Name: VxWorks
Runtime Version: 5.5.1
BSP version: 2.1/1
Created: May 7 2008, 11:52:19
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Executing S10startup script
Disable L2 Switch ports 1-16
VMLangFormat: Not able to load "en" language format.
18/08/2009 06:29:18> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(57)
PostSoftwareLogA: Called before calling OtpLogStartup
18/08/2009 06:29:18> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 0
18/08/2009 06:29:18> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 2
relink_call_ctors start
relink_call_ctors done
volume descriptor ptr (pVolDesc): 0xf167e28
cache block I/O descriptor ptr (cbio): 0xf3e8138
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 1
# of different files in use: 1
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /sysro ; (in boot sector: )
- volume Id: 0x1b6f17e8
- total number of sectors: 117,344
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 230
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 493
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 461
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 6 clusters
- free space on volume: 2,015,232 bytes
volume descriptor ptr (pVolDesc): 0xf165b80
cache block I/O descriptor ptr (cbio): 0xf1e7f60
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /db ; (in boot sector: )
- volume Id: 0x3620000
- total number of sectors: 14,976
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 30
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 93
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 61
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 1 clusters
- free space on volume: 3,506,176 bytes
volume descriptor ptr (pVolDesc): 0xf1638d8
cache block I/O descriptor ptr (cbio): 0xf167ed0
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /vmail ; (in boot sector: )
- volume Id: 0x3a00000
- total number of sectors: 369,408
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 181
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 395
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 363
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 5 clusters
- free space on volume: 167,522,304 bytes
18/08/2009 06:29:21> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(600)
OtpLogStartup: Log server already started. Request ignored.
OtpLogs_Toggle: The following software logs are enabled:
ERROR & WARNING
OtpMaintenanceLogs_Toggle: The following maintenance logs are enabled:
ERROR & WARNING & INFO
MiSslInit(): entry
MiSeedRand(): Start RandStatus = 0
MiSeedRand(): End RandStatus = 1
DSC:rocessArguments - (option -debug)
Debug level set to level 0 -> OSA_ERROR_SEVERITY
SysServices::appStartup: Logs to be redirected to DataServices!
System wide Component Monitoring is DISABLED.
Current system reset mode: [0]
ResourceAlarmStartup ready.
Compact Flash DS Servant SUCCESSFULLY started.
C O M P A C T F L A S H S T A T U S
Compact Flash Present = FALSE
Compact Flash Event Count = 0
Compact Flash Led Colour = OUT
Compact Flash DS Client SUCCESSFULLY started.
ManagementLayerCoordinator::StartUp(): Logs to be redirected to DataServices!
deleting file /db/database/sx200dba_db/sysConf.db
deleting file /db/database/__db.001
Berkeley DB: /db/database/sx200dba_db/sysConf.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/cctdesc.db
Berkeley DB: /db/database/sx200dba_db/cctdesc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/trkAssg.db
Berkeley DB: /db/database/sx200dba_db/trkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/t1lnkdsc.db
Berkeley DB: /db/database/sx200dba_db/t1lnkdsc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/linkAssg.db
Berkeley DB: /db/database/sx200dba_db/linkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/prilnkcf.db
Berkeley DB: /db/database/sx200dba_db/prilnkcf.db: S_dosFsLib_FILE_NOT_FOUND
/db/database/files/200plcfg.db
Management Layer Coordinator SUCCESSFULLY started.
adding names to certificate
added CN = mitel networks sx-200 icp web server
added CN = vxtarget
added CN = 192.168.17.31
added CN = 192.168.22.2
added CN = 192.168.1.2
cert modified
Database verification passed: /db/ipndb/odb/files/MitelDhcpClientEntry.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerGeneral.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerSubnet.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerRange.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerStaticIp.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerOption.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerLease.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpFilter.wdb
Database verification passed: /db/ipndb/odb/files/MitelFltGrpAccessRestrict.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSLan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSWan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSPptp.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwitch.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwGrpPort.wdb
Database verification passed: /db/ipndb/odb/files/MitelPPPGrpPPPoE.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpLogGrpLog.wdb
Database verification passed: /db/ipndb/odb/files/PppSecuritySecretsTable.wdb
Database verification passed: /db/ipndb/odb/files/IpCidrRouteTable.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpDns.wdb
Database verification passed: /db/ipndb/odb/files/MitelDiffServ.wdb
0x2b20800 (tAppStartup): Error encountered with IP Networking database. Verify IP Networking configuration.
0x2b20800 (tAppStartup): ** IPN CDE Server Start **
Start DHCP service
MCC initializing with ST TDM Bus connectivity @ 2Mbs.
0x2b20800 (tAppStartup):
DW pool created with 2560 buffers, platform: 64
Initialized and enabled Mcc2.
-----> Mitel E2T initializing <-----
E2T Startup: E2T IP address = 192.168.22.2
E2T Startup: RTC IP address = 192.168.22.2
Stream_T2E_Startup, binding 64 RTP ports (even ports) in the range of 50000 to 50126
There were 64 UDP ports created.
Stream_T2E_Startup, binding 64 RTCP ports (odd ports) in the range of 50001 to 50127
There were 64 RTCP ports created.
tMediaControl E2t<->E2tProxy MCT communications established
E2T Startup: TDM codec is U_LAW_CODEC
Dsp List Filename: "/sysro/DspConfig/dsplist.txt"
Dsp Config Filename: "/sysro/DspConfig/dspConfig3XXX.txt"
Dsp Card Type Filename: "/sysro/DspConfig/DspCardType.txt"
Dsp Type Filename: "/sysro/DspConfig/DspTypeEmerald.txt"
Dsp Static Loading Filename: "/sysro/DspConfig/loading3XXX.txt"
MITEL SYSTEM ROM R2.1/1 Aug 16 2006 (13)
CCA Number : 56005083 RC.10
System Model : 004f0000 F64
CPU Model : 8270 R0a10
Reset Config : 04043246
Bus Clock (MHz) : 66
CPM Clock (MHz) : 165
Core Clock (MHz) : 264
Internal Memory Map : f0000000
Main Memory (MB) : 256
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f14979e
L2 Switch : 1
Embedded VEC : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Programming FPGA...
Design Name : MN3XXX_LOGIC.ncd
Xilinx Part : 2s300efg456
Build Date : 2004/07/21
Build Time : 13:09:34
Byte Count : 234456
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Version: VxWorks5.5.1
BSP version: 2.1/1
Creation date: Aug 16 2006, 15:48:30
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : ata=auto
unit number : 0
processor number : 0
file name : /partition1/Kts8250.vx
inet on ethernet (e) : 192.168.22.2
host inet (h) : 192.168.17.31
gateway inet (g) : 192.168.17.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : motfcc
Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/ata00) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/ata00) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /ata00/Kts8250.vx...43039424
Starting at 0x10000...
Last reset cause was (0x13) CHECK_STOP_RESET
VxWorks
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Runtime Name: VxWorks
Runtime Version: 5.5.1
BSP version: 2.1/1
Created: May 7 2008, 11:52:19
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Executing S10startup script
Disable L2 Switch ports 1-16
VMLangFormat: Not able to load "en" language format.
18/08/2009 06:22:00> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(57)
PostSoftwareLogA: Called before calling OtpLogStartup
18/08/2009 06:22:00> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 0
18/08/2009 06:22:00> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 2
relink_call_ctors start
relink_call_ctors done
volume descriptor ptr (pVolDesc): 0xf167e28
cache block I/O descriptor ptr (cbio): 0xf3e8138
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 1
# of different files in use: 1
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /sysro ; (in boot sector: )
- volume Id: 0x1b6f17e8
- total number of sectors: 117,344
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 230
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 493
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 461
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 6 clusters
- free space on volume: 2,015,232 bytes
volume descriptor ptr (pVolDesc): 0xf165b80
cache block I/O descriptor ptr (cbio): 0xf1e7f60
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /db ; (in boot sector: )
- volume Id: 0x3620000
- total number of sectors: 14,976
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 30
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 93
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 61
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 1 clusters
- free space on volume: 3,509,248 bytes
volume descriptor ptr (pVolDesc): 0xf1638d8
cache block I/O descriptor ptr (cbio): 0xf167ed0
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /vmail ; (in boot sector: )
- volume Id: 0x3a00000
- total number of sectors: 369,408
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 181
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 395
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 363
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 5 clusters
- free space on volume: 167,522,304 bytes
18/08/2009 06:22:03> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(600)
OtpLogStartup: Log server already started. Request ignored.
OtpLogs_Toggle: The following software logs are enabled:
ERROR & WARNING
OtpMaintenanceLogs_Toggle: The following maintenance logs are enabled:
ERROR & WARNING & INFO
MiSslInit(): entry
MiSeedRand(): Start RandStatus = 0
MiSeedRand(): End RandStatus = 1
DSC:
rocessArguments - (option -debug)Debug level set to level 0 -> OSA_ERROR_SEVERITY
SysServices::appStartup: Logs to be redirected to DataServices!
System wide Component Monitoring is DISABLED.
Current system reset mode: [0]
ResourceAlarmStartup ready.
Compact Flash DS Servant SUCCESSFULLY started.
C O M P A C T F L A S H S T A T U S
Compact Flash Present = FALSE
Compact Flash Event Count = 0
Compact Flash Led Colour = OUT
Compact Flash DS Client SUCCESSFULLY started.
ManagementLayerCoordinator::StartUp(): Logs to be redirected to DataServices!
deleting file /db/database/sx200dba_db/sysConf.db
deleting file /db/database/__db.001
Berkeley DB: /db/database/sx200dba_db/sysConf.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/cctdesc.db
Berkeley DB: /db/database/sx200dba_db/cctdesc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/trkAssg.db
Berkeley DB: /db/database/sx200dba_db/trkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/t1lnkdsc.db
Berkeley DB: /db/database/sx200dba_db/t1lnkdsc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/linkAssg.db
Berkeley DB: /db/database/sx200dba_db/linkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/prilnkcf.db
Berkeley DB: /db/database/sx200dba_db/prilnkcf.db: S_dosFsLib_FILE_NOT_FOUND
/db/database/files/200plcfg.db
Management Layer Coordinator SUCCESSFULLY started.
adding names to certificate
added CN = mitel networks sx-200 icp web server
added CN = vxtarget
added CN = 192.168.17.31
added CN = 192.168.22.2
added CN = 192.168.1.2
cert modified
Database verification passed: /db/ipndb/odb/files/MitelDhcpClientEntry.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerGeneral.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerSubnet.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerRange.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerStaticIp.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerOption.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerLease.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpFilter.wdb
Database verification passed: /db/ipndb/odb/files/MitelFltGrpAccessRestrict.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSLan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSWan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSPptp.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwitch.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwGrpPort.wdb
Database verification passed: /db/ipndb/odb/files/MitelPPPGrpPPPoE.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpLogGrpLog.wdb
Database verification passed: /db/ipndb/odb/files/PppSecuritySecretsTable.wdb
Database verification passed: /db/ipndb/odb/files/IpCidrRouteTable.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpDns.wdb
Database verification passed: /db/ipndb/odb/files/MitelDiffServ.wdb
0x2b20800 (tAppStartup): Error encountered with IP Networking database. Verify IP Networking configuration.
0x2b20800 (tAppStartup): ** IPN CDE Server Start **
Start DHCP service
MCC initializing with ST TDM Bus connectivity @ 2Mbs.
0x2b20800 (tAppStartup):
DW pool created with 2560 buffers, platform: 64
Initialized and enabled Mcc2.
-----> Mitel E2T initializing <-----
E2T Startup: E2T IP address = 192.168.22.2
E2T Startup: RTC IP address = 192.168.22.2
Stream_T2E_Startup, binding 64 RTP ports (even ports) in the range of 50000 to 50126
There were 64 UDP ports created.
Stream_T2E_Startup, binding 64 RTCP ports (odd ports) in the range of 50001 to 50127
There were 64 RTCP ports created.
tMediaControl E2t<->E2tProxy MCT communications established
E2T Startup: TDM codec is U_LAW_CODEC
Dsp List Filename: "/sysro/DspConfig/dsplist.txt"
Dsp Config Filename: "/sysro/DspConfig/dspConfig3XXX.txt"
Dsp Card Type Filename: "/sysro/DspConfig/DspCardType.txt"
Dsp Type Filename: "/sysro/DspConfig/DspTypeEmerald.txt"
Dsp Static Loading Filename: "/sysro/DspConfig/loading3XXX.txt"
MITEL SYSTEM ROM R2.1/1 Aug 16 2006 (13)
CCA Number : 56005083 RC.10
System Model : 004f0000 F64
CPU Model : 8270 R0a10
Reset Config : 04043246
Bus Clock (MHz) : 66
CPM Clock (MHz) : 165
Core Clock (MHz) : 264
Internal Memory Map : f0000000
Main Memory (MB) : 256
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f14979e
L2 Switch : 1
Embedded VEC : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Programming FPGA...
Design Name : MN
MITEL SYSTEM ROM R2.1/1 Aug 16 2006 (83)
CCA Number : 56005083 RC.10
System Model : 004f0000 F64
CPU Model : 8270 R0a10
Reset Config : 04043246
Bus Clock (MHz) : 66
CPM Clock (MHz) : 165
Core Clock (MHz) : 264
Internal Memory Map : f0000000
Main Memory (MB) : 256
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f14979e
L2 Switch : 1
Embedded VEC : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Programming FPGA...
Design Name : MN3XXX_LOGIC.ncd
Xilinx Part : 2s300efg456
Build Date : 2004/07/21
Build Time : 13:09:34
Byte Count : 234456
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
SDRAM CS1 March Test........................ PASSED
SDRAM CS2 March Test........................ PASSED
Starting vxWorks...
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Version: VxWorks5.5.1
BSP version: 2.1/1
Creation date: Aug 16 2006, 15:48:30
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : ata=auto
unit number : 0
processor number : 0
file name : /partition1/Kts8250.vx
inet on ethernet (e) : 192.168.22.2
host inet (h) : 192.168.17.31
gateway inet (g) : 192.168.17.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : motfcc
Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/ata00) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/ata00) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /ata00/Kts8250.vx...43039424
Starting at 0x10000...
Last reset cause was (0x83) POWER_ON_RESET
VxWorks
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Runtime Name: VxWorks
Runtime Version: 5.5.1
BSP version: 2.1/1
Created: May 7 2008, 11:52:19
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Executing S10startup script
Disable L2 Switch ports 1-16
VMLangFormat: Not able to load "en" language format.
18/08/2009 06:29:18> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(57)
PostSoftwareLogA: Called before calling OtpLogStartup
18/08/2009 06:29:18> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 0
18/08/2009 06:29:18> SoftLog - INFO - MIFSM - MiFsmEventUtil.cpp(25)
Internal Message
RegisterEventUtil - Task: N/A
Registering event utility for FSM engine ID 2
relink_call_ctors start
relink_call_ctors done
volume descriptor ptr (pVolDesc): 0xf167e28
cache block I/O descriptor ptr (cbio): 0xf3e8138
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 1
# of different files in use: 1
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /sysro ; (in boot sector: )
- volume Id: 0x1b6f17e8
- total number of sectors: 117,344
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 230
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 493
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 461
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 6 clusters
- free space on volume: 2,015,232 bytes
volume descriptor ptr (pVolDesc): 0xf165b80
cache block I/O descriptor ptr (cbio): 0xf1e7f60
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /db ; (in boot sector: )
- volume Id: 0x3620000
- total number of sectors: 14,976
- bytes per sector: 512
- # of sectors per cluster: 2
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 30
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 93
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 61
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 1 clusters
- free space on volume: 3,506,176 bytes
volume descriptor ptr (pVolDesc): 0xf1638d8
cache block I/O descriptor ptr (cbio): 0xf167ed0
auto disk check on mount: NOT ENABLED
max # of simultaneously open files: 62
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /vmail ; (in boot sector: )
- volume Id: 0x3a00000
- total number of sectors: 369,408
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 181
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 395
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- root dir start sector: 363
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 5 clusters
- free space on volume: 167,522,304 bytes
18/08/2009 06:29:21> SoftLog - WARNING - MSPLogServer - OtpLogs.cpp(600)
OtpLogStartup: Log server already started. Request ignored.
OtpLogs_Toggle: The following software logs are enabled:
ERROR & WARNING
OtpMaintenanceLogs_Toggle: The following maintenance logs are enabled:
ERROR & WARNING & INFO
MiSslInit(): entry
MiSeedRand(): Start RandStatus = 0
MiSeedRand(): End RandStatus = 1
DSC:
rocessArguments - (option -debug)Debug level set to level 0 -> OSA_ERROR_SEVERITY
SysServices::appStartup: Logs to be redirected to DataServices!
System wide Component Monitoring is DISABLED.
Current system reset mode: [0]
ResourceAlarmStartup ready.
Compact Flash DS Servant SUCCESSFULLY started.
C O M P A C T F L A S H S T A T U S
Compact Flash Present = FALSE
Compact Flash Event Count = 0
Compact Flash Led Colour = OUT
Compact Flash DS Client SUCCESSFULLY started.
ManagementLayerCoordinator::StartUp(): Logs to be redirected to DataServices!
deleting file /db/database/sx200dba_db/sysConf.db
deleting file /db/database/__db.001
Berkeley DB: /db/database/sx200dba_db/sysConf.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/cctdesc.db
Berkeley DB: /db/database/sx200dba_db/cctdesc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/trkAssg.db
Berkeley DB: /db/database/sx200dba_db/trkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/t1lnkdsc.db
Berkeley DB: /db/database/sx200dba_db/t1lnkdsc.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/linkAssg.db
Berkeley DB: /db/database/sx200dba_db/linkAssg.db: S_dosFsLib_FILE_NOT_FOUND
deleting file /db/database/sx200dba_db/prilnkcf.db
Berkeley DB: /db/database/sx200dba_db/prilnkcf.db: S_dosFsLib_FILE_NOT_FOUND
/db/database/files/200plcfg.db
Management Layer Coordinator SUCCESSFULLY started.
adding names to certificate
added CN = mitel networks sx-200 icp web server
added CN = vxtarget
added CN = 192.168.17.31
added CN = 192.168.22.2
added CN = 192.168.1.2
cert modified
Database verification passed: /db/ipndb/odb/files/MitelDhcpClientEntry.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerGeneral.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerSubnet.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerRange.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerStaticIp.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerOption.wdb
Database verification passed: /db/ipndb/odb/files/MitelDhcpServerLease.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpFilter.wdb
Database verification passed: /db/ipndb/odb/files/MitelFltGrpAccessRestrict.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSLan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSWan.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSPptp.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwitch.wdb
Database verification passed: /db/ipndb/odb/files/MitelMIPSSwGrpPort.wdb
Database verification passed: /db/ipndb/odb/files/MitelPPPGrpPPPoE.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpLogGrpLog.wdb
Database verification passed: /db/ipndb/odb/files/PppSecuritySecretsTable.wdb
Database verification passed: /db/ipndb/odb/files/IpCidrRouteTable.wdb
Database verification passed: /db/ipndb/odb/files/MitelIpGrpDns.wdb
Database verification passed: /db/ipndb/odb/files/MitelDiffServ.wdb
0x2b20800 (tAppStartup): Error encountered with IP Networking database. Verify IP Networking configuration.
0x2b20800 (tAppStartup): ** IPN CDE Server Start **
Start DHCP service
MCC initializing with ST TDM Bus connectivity @ 2Mbs.
0x2b20800 (tAppStartup):
DW pool created with 2560 buffers, platform: 64
Initialized and enabled Mcc2.
-----> Mitel E2T initializing <-----
E2T Startup: E2T IP address = 192.168.22.2
E2T Startup: RTC IP address = 192.168.22.2
Stream_T2E_Startup, binding 64 RTP ports (even ports) in the range of 50000 to 50126
There were 64 UDP ports created.
Stream_T2E_Startup, binding 64 RTCP ports (odd ports) in the range of 50001 to 50127
There were 64 RTCP ports created.
tMediaControl E2t<->E2tProxy MCT communications established
E2T Startup: TDM codec is U_LAW_CODEC
Dsp List Filename: "/sysro/DspConfig/dsplist.txt"
Dsp Config Filename: "/sysro/DspConfig/dspConfig3XXX.txt"
Dsp Card Type Filename: "/sysro/DspConfig/DspCardType.txt"
Dsp Type Filename: "/sysro/DspConfig/DspTypeEmerald.txt"
Dsp Static Loading Filename: "/sysro/DspConfig/loading3XXX.txt"
MITEL SYSTEM ROM R2.1/1 Aug 16 2006 (13)
CCA Number : 56005083 RC.10
System Model : 004f0000 F64
CPU Model : 8270 R0a10
Reset Config : 04043246
Bus Clock (MHz) : 66
CPM Clock (MHz) : 165
Core Clock (MHz) : 264
Internal Memory Map : f0000000
Main Memory (MB) : 256
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f14979e
L2 Switch : 1
Embedded VEC : 0
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Programming FPGA...
Design Name : MN3XXX_LOGIC.ncd
Xilinx Part : 2s300efg456
Build Date : 2004/07/21
Build Time : 13:09:34
Byte Count : 234456
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC82XX F64
Version: VxWorks5.5.1
BSP version: 2.1/1
Creation date: Aug 16 2006, 15:48:30
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : ata=auto
unit number : 0
processor number : 0
file name : /partition1/Kts8250.vx
inet on ethernet (e) : 192.168.22.2
host inet (h) : 192.168.17.31
gateway inet (g) : 192.168.17.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : motfcc
Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/ata00) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/ata00) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /ata00/Kts8250.vx...43039424
IrwinMFletcher
Programmer
Bad dsp card, try reseating it. Hopefully you have one, otherwise it's the dsps on the mainboard. If it is a card, you can remove it if reseating it doesn't work. You won't get full functionality but it should stop the reboot cycle....again, unless it's the onboard dsps that are dying.
- Thread starter
- #7
2400tec said:
This was the last entry before both boot cycles:
Dsp Static Loading Filename: "/sysro/DspConfig/loading3XXX.txt"
So it stops booting when loading the DSPs.
_______________________________________________________________
If you did not take enough time to get it right the first time...
What makes you think that you have time to fix it?
- Thread starter
- #9
IrwinMFletcher
Programmer
There is a bunch of things that happen after that line that don't produce outputs, but if the reset happened directly (within 1-5 seconds) it was most likely the DSPs. When there is a write/read error (bus conflict) on any of the MMC modules, it can produce a system crash with no output.
Out of curiosity, what caused the system to initially reboot? Was this on an upgrade? or regular maintenance reboot, or power outage?
Out of curiosity, what caused the system to initially reboot? Was this on an upgrade? or regular maintenance reboot, or power outage?
- Thread starter
- #11
No Idea, Another market sent the system out to a off-site facility and they couldn't get it to work...so we replaced the system and they sent this back...It could have been bad to begin with or someone made it bad...Too many parties involved to determine.
I have got similar situation with one of old 3300. Sometimes it will finish booting and will even work for few minutes or hours. Or it will reboot just like this one. I decomissioned the box. You can save sysid and just buy bare hardware for replacement on eBay really cheap.
IrwinMFletcher
Programmer
slapin, I have seen that as well. In those cases, it is most likely that the signals are at the limit, just enough to boot the dsps. However it's usually the first access to the dsp that cases the issue after it boots...an ONS set going off hook for example, that will trigger the failure.
- Thread starter
- #17
- Thread starter
- #19
- Status
Similar threads
- Locked
- Question