I have a customer with a brand new SX-200 AX with LS trunks. In Night 1 mode, calls forward to an outside Answering Service via Abbreviated Dial. I have the Night 1 destination in the Non Dial-In Trunks form going to (sc151).
This works fine except when the staff at the Answering Service doesn't answer the call quick enough. It appears the call is coming back, perhaps "recalling" and then going back out again, causing a loop.
What timer in Class of Service is affecting this? I'm assuming it would be the Trunk's Class of Service.
Any advice would be helpful!
I've been trying to find Mitel docs that define each COS option for the SX200. No luck
This works fine except when the staff at the Answering Service doesn't answer the call quick enough. It appears the call is coming back, perhaps "recalling" and then going back out again, causing a loop.
What timer in Class of Service is affecting this? I'm assuming it would be the Trunk's Class of Service.
Any advice would be helpful!
I've been trying to find Mitel docs that define each COS option for the SX200. No luck