Replacing a system that has a PRI to SIP convertor. The SP providing PRI. The old system could not take PRI. We provided a new system with a PRI card so we would have less hardware to troubleshoot.
Incoming works fine with no issues. Outgoing calls set up and complete. The call then drops after 4 seconds. NTAC helped us determine that we are getting a disconnect from the provider with a Cause Code of 98. Any ideas if there are any settings we can check?
SV9100 running R12
Thank you. ~ Mike Meyer
Incoming works fine with no issues. Outgoing calls set up and complete. The call then drops after 4 seconds. NTAC helped us determine that we are getting a disconnect from the provider with a Cause Code of 98. Any ideas if there are any settings we can check?
SV9100 running R12
Thank you. ~ Mike Meyer