Strange Problem 3

[msubhan]

Hi experts
I have got Mat works software and installed connected to NEC Univerge 2000 IPS. When i enter command 10 de000de gives output.If i enter after command any other LEN Number gives output digit error. Also if enter CMD30 it shows after de Digit error. The Laptop is Widows 7 32bit the compatability mode is Windows Xp Sp3. Also i need help to change some extension numbering.Please give me commands for MOC to delete a number and change to new number.The pbx build is 2008. I will be very thankful to help me for the above problems.
Thank you to all experts.
Msubhan KSA

 

[belevedere]

I believe the 32d Dterm80 is for the key systems and will not work on the IPS 2000.

 

[msubhan]

Thank you to all for kind reply I assigned the digital station for manager the old telephone which is I series works fine but the new Dterm 80 does not work. As replied sir Beleveder that it works on key system. So what to do.
Thanks and best regards.

 

[msubhan]

Hi and good afternoon to all experts. In our pabx there are eight pims we have ring problem for all extensions in pim7. So I changed the power supply from pim no8 to pim no7.The ring problem solved. We have Four digital cards in pim no1 and use only 3 stations. Can we replace the analogue cards from pim8 to pim1 and digital to pim8. Any help will be highly appreciated.
Thanks and best regards to all.