Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCN Trunk line error

Status
Not open for further replies.

Demce0501

Technical User
Jul 11, 2013
59
US
Just upgraded 5 IPO's from 8.1 to 11. Everything works great, but on two of 4 IP Office SCN lines - I'm getting "Incompatible codec settings detected. Media path may not be operational" The lines do work though. The settings are the same as two other lines that don't have this error. The error appears in red in system manager and cannot be cleared.

The codecs on the Voip tab are all set to system default.

Any one else experience this?
 
Saw this myself, it was because the codecs were different on each side of the scn, make them all match exactly across every scn line (dont rely on system default).

| ACSS SME |
 
Pepp, you were right. If the codecs are in the wrong order, you will get that error. You do have to choose custom, and put the same codecs in, with the same order.

Thanks for the help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top