Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCN site to site gets busy and unattainable 3

Status
Not open for further replies.

Desmisclvlv

Vendor
Oct 4, 2022
62
US
We made a few changes over the weekend and after we rebooted all the sites with the changes we found out that the main site that has the PRI can receive calls and place calls but from site to site we are unable to c call each other's extension.

We are able to dial 9 to get an outside line from any of the other two sites for outgoing but incoming and extension to extension gets busy or unobtainable.

Checked all the configurations even loaded some configurations from a few days ago on all three sites hoping that would solve the problem but we're still having the same situation.

Any suggestions? If anyone has remote service available please let me know.

Thank you
 
Are the SCN tunks set to Proprietary or WebSocket try switching them to get them to restore. Also in SSA -> IP Network -> Routes can you even ping the other IPO. Maybe the network routing is broken.

- IP Office Tech
 
Well of all thing it turned out to be the VCM card. Replaced it and everything came back up.
 
Star given for confirming the solution


Do things on the cheap & it will cost you dear

ACSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top