SCN requirements for IPO 3.2 2

[tmckeown]

I currently have three IP Office systems.
1) IP412 licenses: eBLF, Integrated Messaging, Phone Manager Pro, SoftConsole, Voicemail Pro
2) IP406 licenses: SoftConsole, Voicemail Pro
3) IP403 licenses: none

I've had an SCN from the IP406 to the IP412 for about ten years. I recently added the IP403 to a new location and configured it very similar to the IP406. I have a IPSec tunnel from the 403 to the 412 with all traffic allowed. So far, I can't get the SCN to start working. I figure it has to be a licensing issue. Maybe I need Voicemail Pro?

Can someone tell me what licenses I would need for the IP403 to get SCN working?

Thanks for the help!!

 

[IPGuru]

IP400 series did not need a licence for SCN

if you cant get the system to connect & you have checked your programming then it is almost certainly an issue on the data network



Do things on the cheap & it will cost you dear

 

[NYSTECH]

Didn't you still need voice networking licenses?

 

[NYSTECH]

Or that was built in the VCM cards

 

[IPGuru]

No , networking licence not req
VCM is req though , a missing VCM could be the cause of the problem


Do things on the cheap & it will cost you dear

 

[intrigrant]

a missing VCM could be the cause of the problem

I think it IS the cause of the problem.

 

[tmckeown]

Thank you SOOOO much for the helpful replies. This is such a great forum!
Is there a simple way to check if there is a VCM in the IP403 without taking off the cover?

 

[mforrence]

When you first start Monitor, the text will show VCM resources

Mike Forrence

http://www.goteamvox.com

 

[Pepp77]

Monitor

| ACSS SME |

 

[tmckeown]

Thank you guys so much for the help. Per Monitor, it looks like there is no VCM installed. VCOMP=0
I will get one ordered today.

 

[intrigrant]

eBay.
These units are ancient, they really need to be replaced with uptodate systems.

 

[amriddle01]

Indeed, they have an ethernet hub in them, that's how old they are

 

[tmckeown]

as a followup to this thread. I did get the VCM and installed it. The SCN is working as expected now.
Thank you all for the help!

 

[joe2938]

then show them some pink then if this was helpful!