Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RMATS Line Not Answering

Status
Not open for further replies.

MISphone

Technical User
Dec 16, 2008
7
US
Tried to dial into the Definity G3siv6 and the system will not answer. When the RMATS number is dialed it just rings no answer.

I have dial tone to the 25th pair on the Aux cable. Any suggestions as to what could be the problem and how it could be fixed.

Your help is greatly appreciated.
 
Did you confirm the number on the 25th pair of the AUX cable?

Kevin
 
It's a POTS line. I hooked the butt set up and was able to make and receive calls.
 
Assuming it's not a Prologix, you probably have a bad maintenance board. Since it will require a powerdown to replace it, you may want to try a 'reset system 1'. That should not be service affecting.

Kevin
 
You are correct it's a old Definity G3si system. Thanks for the suggestion, I appreciate the help. I will do the system reset this weekend.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top