Restore IP 406 v4.1 to IP 500 V2 v7 1

[ValiantSoft1]

I have an IP 406 v2 v4.1.9 with:
(1) Analog Trunk 16 V2 v6.1.9
(1) DS30 V2 v6.1.9
(2) Phone 30 (V2) v6.1.9
Embedded voice mail
5420, 5410 digital phones

Can I restore the config from the Ip406 to the IP500 V2? What is the recommended upgrade path so I don't have to re program the IP500?

Thanks

 

[tlpeter]

Put a Phone 2 and a DS8 in the IP500v2 and then you can open the config offline and send it to the IP500V2.
It will ask you to convert it from a 406V2 to an IP500V2.


BAZINGA!

I'm not insane, my mother had me tested!

 

[ValiantSoft1]

Have you encountered any problems with this?

Thanks

 

[tlpeter]

I did when i used a combocard and a DS8.
I had to move some extension from one card to the other but that was it.


BAZINGA!

I'm not insane, my mother had me tested!

 

[ValiantSoft1]

How long does it take? Thanks

 

[RodneyMcSnow]

Should be pretty quick. A few minutes.