Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Programming a D-ch to be "shared" 1
- Thread starter Niseold
- Start date
-
1
- #2
Proram the 1st d-channel normally. When you program the 2nd d-channel, build it as:
LD 17
REQ: CHG
TYPE: ADAN
ADAN: NEW BDCH xx (backup d-channel)
PDCH: yy (primary d-channel)
All other prompts will take on the primary d-channel's settings.
War Eagle!
Lions Baseball '09!
LD 17
REQ: CHG
TYPE: ADAN
ADAN: NEW BDCH xx (backup d-channel)
PDCH: yy (primary d-channel)
All other prompts will take on the primary d-channel's settings.
War Eagle!
Lions Baseball '09!
Sorry Niseold, can you explain further? Do you have a primary and backup D already in place and want to add two more spans, or are you adding a backup D and a third span?
If adding a backup D, see Telebub's instructions above. If you're adding additional spans, you'll need to change the PRI prompt on the D channel in LD 17 ADAN. At the PRI prompt enter the new span's loop number and the Interface ID (IID) being provided by he telco. The primary D needs to be disabled to do this work, so you might want to do this after hours.
If adding a backup D, see Telebub's instructions above. If you're adding additional spans, you'll need to change the PRI prompt on the D channel in LD 17 ADAN. At the PRI prompt enter the new span's loop number and the Interface ID (IID) being provided by he telco. The primary D needs to be disabled to do this work, so you might want to do this after hours.
Shared dchannels and backup dchannels are 2 different entities.
To share a dchannel.
After you build the loops in cequ
you build the dchannel.
chg
adan
new dch xxx
where it ask for pri
type in the loop that will share and the number 2 - 15.
2 - 15 means the order of the shared loops.
Of course one is the loop that the dchannel belongs to.
pri loop number and x meaning order of loops.
But also remember that the local telco has to set these up also.
If you do not have sharing coming from the telco then this will not work.
****
To share a dchannel.
After you build the loops in cequ
you build the dchannel.
chg
adan
new dch xxx
where it ask for pri
type in the loop that will share and the number 2 - 15.
2 - 15 means the order of the shared loops.
Of course one is the loop that the dchannel belongs to.
pri loop number and x meaning order of loops.
But also remember that the local telco has to set these up also.
If you do not have sharing coming from the telco then this will not work.
****
- Thread starter
- #6
I guess I'm not quiet following the entry of the shared dchannel
I have two PRI's one is 8 (primary dchannel)and the one to add is 9
so, at the DCHL prompt I enter 8
then at PRI I enter in sequence?
8 9 or 9 8 (descending)or do I just enter 9?
>>>>>
Shared dchannels and backup dchannels are 2 different entities.
To share a dchannel.
After you build the loops in cequ
you build the dchannel.
chg
adan
new dch xxx
where it ask for pri
type in the loop that will share and the number 2 - 15.
2 - 15 means the order of the shared loops.
Of course one is the loop that the dchannel belongs to.
pri loop number and x meaning order of loops.
But also remember that the local telco has to set these up also.
If you do not have sharing coming from the telco then this will not work.
I have two PRI's one is 8 (primary dchannel)and the one to add is 9
so, at the DCHL prompt I enter 8
then at PRI I enter in sequence?
8 9 or 9 8 (descending)or do I just enter 9?
>>>>>
Shared dchannels and backup dchannels are 2 different entities.
To share a dchannel.
After you build the loops in cequ
you build the dchannel.
chg
adan
new dch xxx
where it ask for pri
type in the loop that will share and the number 2 - 15.
2 - 15 means the order of the shared loops.
Of course one is the loop that the dchannel belongs to.
pri loop number and x meaning order of loops.
But also remember that the local telco has to set these up also.
If you do not have sharing coming from the telco then this will not work.
bigindian65
Technical User
I believe if the D is on 8 then 9 2
Mato' Was'aka
Mato' Was'aka
- Status
Similar threads
- Locked
- Question
- Locked
- Question