We are trying to program TIE trunks for a PRI2 card on a CS1000E. I have already programmed the DDB, CEQU, DCH, Net data, and RDB.
However, while attempting to program the 30 trunks in element manager or in LD 14, I receive err SCH0126: "Station type conflicts with existing card.For example: In LD 11, the craftperson has attempted to provision a digital set in the same IPE slot as an existing ITG card."
the system is as followed: the main cabinet is nummbered (4 0) and the expansion. so the first card in the main is 4 0 1
(the pri card is in our case in slot 1, so he is 4 0 1)
when we try to program the TIE trunk to TN 4 0 1 0, we receive above error..
the system is a CS1000E Release 7.5
Thanks,
Rev
However, while attempting to program the 30 trunks in element manager or in LD 14, I receive err SCH0126: "Station type conflicts with existing card.For example: In LD 11, the craftperson has attempted to provision a digital set in the same IPE slot as an existing ITG card."
the system is as followed: the main cabinet is nummbered (4 0) and the expansion. so the first card in the main is 4 0 1
(the pri card is in our case in slot 1, so he is 4 0 1)
when we try to program the TIE trunk to TN 4 0 1 0, we receive above error..
the system is a CS1000E Release 7.5
Thanks,
Rev