Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI Trunks programming error sch0126 9

Status
Not open for further replies.

Reveleo

Technical User
Jul 23, 2011
10
SR
We are trying to program TIE trunks for a PRI2 card on a CS1000E. I have already programmed the DDB, CEQU, DCH, Net data, and RDB.
However, while attempting to program the 30 trunks in element manager or in LD 14, I receive err SCH0126: "Station type conflicts with existing card.For example: In LD 11, the craftperson has attempted to provision a digital set in the same IPE slot as an existing ITG card."

the system is as followed: the main cabinet is nummbered (4 0) and the expansion. so the first card in the main is 4 0 1
(the pri card is in our case in slot 1, so he is 4 0 1)

when we try to program the TIE trunk to TN 4 0 1 0, we receive above error..

the system is a CS1000E Release 7.5

Thanks,
Rev
 
Just put a system in a couple of months ago that had 64 PRI's so it is engrained in my grey matter for ever :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top