Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pri outgoing caller id

Status
Not open for further replies.

pccsipoffice

Technical User
Apr 17, 2012
255
US
I am working with my local cable company who is the provider for our PRI on the ip office 500v2 9.1.

After researching in this forum I determined that using the following short code in user settings would be
what was needed to get this working.

Code: ?
Feature: Dial
Telephone Number: .sxxxxxxxxxx (10 digit number to send)
Line Group Id: 0

This so far this has not worked. Where to go from here?


 
I agree with TTT. Use the ARS. That's what it's there for.


I also recommend that you do not use group 0 for your trunks. I prefer to have all my actual trunks in either in/out group 1 or in something that makes sense (group 50 for a SIP trunk to 10.50.x.x for example).

- Qz

 
Thanks to all that helped on this. The solution that worked for us was:

Code: 9N;
Feature: Dial
Telephone Number: Nsixxxxxxxxxx (10 digit number to send)
Line Group Id: 0 (line group of PRI)




 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top