Just installed R6.0 ACS to replace a older Partner 3.1 processor. Need assistance to have Station 10 and 11 answer the six incoming lines. Currently all stations are ringing incoming lines. What program setting to have station 10 & 11 (Operators) to handle incoming lines first, then if not answered in three rings rolls to specific other stations. Getting better and better with Partner as I go.Noticed that *71 (Paging) gets a busy tone at all stations...Used to work with older 3.1...By the way, all this would not have been needed if it wasn't for that little battery failing in 3.1 Processor..Thanks in Advance..