O/G CLI for virtual numbers (Keysystem and multicall keys) 3300 CX

[Jakt99]

Hi All

I have a customer that wants to be able to use multiple line keys to deliver different cli from the same handset, so is it possible to setup separate CLI delivery on outgoing calls (thru ISDN) when selecting say a keysystem or multicall key.

Thus far my initial testing shows ability to deliver the prime line of 53xx handsets but no the virtuals. I have setup the usual CPN substitution across the indial range, applied to isdn ports and played with COS of handsets.

Hope above makes sense.

CX running MCD 4.2

 

[timfy69]

Hi Jakt99

I did this the other day but cheated. Using COR via ARS to designate the trunk group, I backed an analog extn into a LS port and set the CPN Substitution accordingly for the ana extn. It works but obviously limits your choices somewhat depending on available ccts...

Cheers Mate!!

 

[Mitelmatt]

JakT99

There is a lot easier way.

Set up your keys with DN's, assign the CPN you want for the keys.

Then in the COS of the sets enabled "Non Prime Network Identity"

That's it

Let me know how you get on

 

[Jakt99]

Thanks all,

Mitelmatt
thanks for cos option, I missed that option and will give it a go and advise results.

timfy69
good idea matey, unfortunately have many more clis to deliver than the 4 available ons ports can provide.

 

[tdmneil]

Did exactly the same as Mitelmatt the other day for the first on a 4.2. I just used the associated directory number form instead and added the DN of the m/call key and assigned the relevent outgoing cli. And it worked!!

 

[Jakt99]

For Mitelmatt

Your suggestion works a treat, thanks

 

[Mitelmatt]

No problem mate. Glad i could help

Maybe a star?? :)