RuuvanVadtel
Technical User
Hello fellow tek-tippers!
I hope you're all having a wonderful day. Hopefully this is a quick answer from anyone UK based who's dealt with ISDN2.
We've got 4x ISDN2 channels on an NS700, got the mobile twinning all working (happy days) but is sending the main CLI of the i2 (understandably).
All settings on the NS700 to send original caller ID are enabled, but it's not working. This is going to be due to a service missing off the ISDN2 (right?).
Now, with the IP500, putting Call Diversion on the ISDN2 and supporting partial re-routing through the system worked, but will it work for the NS700?
Presentation Number 3,4,5 on ISDN30 would do it, but we're stuck on i2 in this instance and I don't believe they've added beefier number presentation options to BRI..
If anyone could please throw some advise at me, I would be very appreciative!
I hope you're all having a wonderful day. Hopefully this is a quick answer from anyone UK based who's dealt with ISDN2.
We've got 4x ISDN2 channels on an NS700, got the mobile twinning all working (happy days) but is sending the main CLI of the i2 (understandably).
All settings on the NS700 to send original caller ID are enabled, but it's not working. This is going to be due to a service missing off the ISDN2 (right?).
Now, with the IP500, putting Call Diversion on the ISDN2 and supporting partial re-routing through the system worked, but will it work for the NS700?
Presentation Number 3,4,5 on ISDN30 would do it, but we're stuck on i2 in this instance and I don't believe they've added beefier number presentation options to BRI..
If anyone could please throw some advise at me, I would be very appreciative!