NS700, paging volume low

[Justin RSU34]

One of our schools has been complaining about low paging volume. I've addressed it once before and it seemed to work fine a few months ago, all I had to do was raise the volume on speaker phone. It seems to be low volume when paging again, but the volume is still cranked up. Is there anything else I can do to fix it? Thanks.

 

[raoul008]

Could be a lot of thing but if it is only the audio from the system that is bad my first try is replace wiring from the system to ampli it has happened to me in the past if nothing fixed it a pre-amp can be use to boost audio a bit

 

[martincom]

The "Find" tool is your friend. Open the pdf for the PC programming manual. From the "Edit" drop down menu, select "Find". Type "gain" in the "Find" search box. The first entry will display the table of contents for "audio gain". This will point you to the page in the manual where it details how to adjust the paging audio gain for a PT phone speaker. Specifically, in the maintenance console: PBX Configuration\2. System\11. Audio Gain\1.Paging/MOH