No Outbound Calls 1

[MikeArcade]

This is an update to thread

http://tek-tips.com/viewthread.cfm?qid=1694291

We were unable to get the system fully operational so we are building it back on a new core card.
We now have all inbound call, but nothing is going out.
Im sure its an easy fix, but my brain is so burnt out I must be overlooking it.

All calls go fast busy and "Release and try again"
However, if i build an ACDN that is NCFW to any outside number it works fine.

Ideas? Insight? Sarcastic remarks?

Michael
"Will Work For Food..."

 

[KCFLHRC]

Check your ESN data block if you built everything back in BARS along with the NCOS on the phone and the FRL in the RLI

 

[GHTROUT]

Print out all your LD86 Route Lists so you know what they are now - then go and change all the FRLs to zero in each ENTR of each RLI.

Then in the LD86 ESN Data Block, set TGAR=NO

Now BARS won't restrict anything.

If that works, you have some breathing room.

Find more at GHTROUT.com

 

[MikeArcade]

I have bypassed BARS... PRI route now has ACOD of 9, but all calls rejected.

Michael
"Will Work For Food..."

 

[MikeArcade]

OK, this just got stupid. If i out the phone and build it back as basic as possible the calls are successful.
As soon as i add a name to the set, the calls are rejected.

Michael
"Will Work For Food..."

 

[GHTROUT]

Look at the DCH and see what RCAP is. You can remove RCAP values by preceding them with "X" - Like XNDS

I suspect you are sending out NAME and the telco does not like that.

Find more at GHTROUT.com

 

[MikeArcade]

GH is the winner!!!
Holy Crap i am tired of this mess

Michael
"Will Work For Food..."