Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NO DIAL TONE ON AOM

Status
Not open for further replies.

toolhead

Technical User
Nov 8, 2004
139
US
Just programed two pick ups on an add on module. There not pulling dial tone. Any ideas ?
 
TN 008 0 10 05
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 1
FDN 6850
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST 0
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD FITD CLTD ASCD
CPFD CPTD ABDD CFHD FICD NAID BUZZ AGRD MOAD
AHA DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CDMR
CPND_LANG ENG
RCO 0
HUNT 6850
LHK 32
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 8345 0 MARP
CPND
NAME JOYCELYN KIRBY-CLARK
XPLN 20
DISPLAY_FMT FIRST,LAST
01 SCR 2545 0 MARP
CPND
NAME JOYCELYN KIRBY-CLARK
XPLN 20
DISPLAY_FMT FIRST,LAST
02 SCN 7389 0
03
04
05
06
07
08 TRN
09 AO6
10 CFW 16 917188302750
11 DIG 69 45 R
12
13 PRK
14 MWK 6850
15
16
17 SCR 7310 0
CPND
NAME I.T.
XPLN 5
DISPLAY_FMT FIRST,LAST
18
19 SCR 6754 0
CPND
NAME JEBASHINI JESURASA
XPLN 18
DISPLAY_FMT FIRST,LAST
20 SCR 2754 0
CPND
NAME JEBASHINI JESURASA
XPLN 18
DISPLAY_FMT FIRST,LAST
21
22 SCR 7643 0
CPND
NAME CLETIS EARLE
XPLN 12
DISPLAY_FMT FIRST,LAST
23 SCR 2193 0
CPND
NAME CLETIS EARLE
XPLN 12
DISPLAY_FMT FIRST,LAST
24
25
26
27
28
29
30
31
32
33
34
35
36
37
DATE 4 AUG 2010


NACT
TIM153 10:00 4/8/2010 CPU 1
 
Could the other appearances of these DNs been busy when you tried to draw DT? The programming looks ok to me.
 
do they flash when you call the number? If not check the actual set to see if it could be forwarded to another number.
 
When i programed, on the user for key key 22 was on.
 
Think im just going to do an old fashioned unplug / Plug in of the phone with the AOM. Cant hurt.Andf see what happens.
 
Have you tried swapping out the AOM? Also, make sure you have not put one of the screws through the ribbon cable, that can cause strange things to happen.
 
Some of the other keys on the AOM work, right? Re-connecting will not hurt. What does a trace of the TN show?
 
try to put the SCR numbers on different keys, could be deffective keys

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
It works now..for some reason ..after i did a data dump.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top