Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No CDR output

Status
Not open for further replies.
Nasredine

Nasredine

Programmer
May 1, 2022
33
DZ
Hi,
I'm trying to activate CDR. I'm not the one that has configure it before, so I'm not sure if it was done properly.
When I execute : DIS-LSSM; I've the server activated but when I try to log into it to get records using SSH or Telnet, I got timeout error.
Any help.

********* RMX : LOGON at 2022/12/16 08:46:46 ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX Contract: 00 Name:

L01: LOGON ACCEPTED TSN 3226 ALLOCATED 22-12-16 08:47:07
<DIS-LSSM;

DIS-LSSM;
H500: AMO LSSM STARTED

+=========================================================================+
| STATE OF LAN - CHANNELS |
+=========================================================================+
| | | SYSTEM | USER |
| TCP- | STATE |=========================================================|
| LINE | | IP ADRESS | PORT | IP ADRESS | PORT |
+=========================================================================+
| 1 | ON | 192.0.2.3 | 1201 | 0.0.0.0 | 0 |
| 2 | ON | 192.0.2.3 | 1202 | 0.0.0.0 | 0 |
| 3 | OFF | 0.0.0.0 | 0 | 0.0.0.0 | 0 |
| 4 | OFF | 0.0.0.0 | 0 | 0.0.0.0 | 0 |
| 5 | OFF | 0.0.0.0 | 0 | 0.0.0.0 | 0 |
| 6 | ON | 192.0.2.3 | 1206 | 0.0.0.0 | 0 |
+=========================================================================+

AMO-LSSM -111 LINE SWITCH, SERVICE MODULES
DISPLAY COMPLETED;
<***** ***** AMO run time 00:00:01 *****

************************* RMX : LOGOFF *************************

*** HICOM-Nr: RMX Contract: Name:
 
Sort by date Sort by votes
Hi Moriendi,
In fact, I noted that my client script was successfully connected the server. However, not output is displayed except the line of dashed "#####".

ddd_pnuq7x.png


Could you please provide the appropriate commands for each instruction you mentioned?

Kind regards.
 
Upvote 0 Downvote
Hi,

Is anyone is able to help me reconfig the CDR to be able to access it.

Regards.
 
Upvote 0 Downvote
Please show
DIS-FEACG;
DIS-FEASU;
DIS-COT:XX; outgoing trunk
REG-LDAT:XXX; outgoing trunk
 
Upvote 0 Downvote
Deactivate sels 1.
Change the selg for selg 2 to set resop to no and throughconn to no.
Make an updat on a1
Reload the adp
Reg sels to make sure sels 2 is still on.
Connect your app and wait.

 
Upvote 0 Downvote
Hi,

@masviss, please find below output of the commands.

For the last two commands, there are multiple outgoing trunks. I have executed the command for trunk 1. Please let me know if you need the output for the remaining trunks.

@Moriendi, I'm not familiar with Hipath 4000. Could you please provide the commands for the instructions you mentioned?


DIS-FEACG;

Code: 
*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 9080 ALLOCATED                         23-07-15 13:05:54
  <DIS-FEACG; 

DIS-FEACG;
H500:  AMO FEACG STARTED
                                                                                
CALL DATA REGISTRATION AT ATTENDANT CONSOLE                : DEACTIVATED;     
                                                                                
CALL DATA REGISTRATION ON ADD. DEVICE, IMMEDIATE OUTPUT    : ACTIVATED;     
                                                                                
CALL DATA REGISTRATION ON ADDITIONAL DEVICE, CALL UP       : ACTIVATED;     
                                                                                
CALL DATA REGISTRATION PER STATION, PRINTER OUTPUT         : ACTIVATED;     
                                                                                
CALL DATA REGISTRATION ON FAST OUTPUT DEVICE               : DEACTIVATED;     
 
AMO-FEACG-111       SMDR/DMDR FEATURE LIST                                      
DISPLAY COMPLETED;
  <*****  ***** AMO run time 00:00:01  *****

************************* RMX :  LOGOFF *************************


DIS-FEASU;

Code: 
L01: LOGON ACCEPTED TSN 9081 ALLOCATED                         23-07-15 13:08:06
  <DIS-FEASU; 

DIS-FEASU;
H500:  AMO FEASU STARTED
ACTIVATED FEATURES                                                              
 
CRITM    LDME     SPDC     SPDI     HTVCE    HTFAX    HTDTE    OVR     
FRKN     NIGHT    COSXCD   COSXKEY  DCOSX    COSXATND COSXT    COSXDP  
ICPTDID  HOTRCL   DND      VARCONF  TRACE    SNR      RKNOVR   CBK     
DSS      SPLIT    ONHKTRNS PU       RSVCO    SER      DDTES    ISTR    
RNG      NOCHRG   TRACCO   LEDSIGN  VMSDP    EMOVR    EMRLS    SYNCANN 
CDRINH   CDRIC    CDROGNW  CDROGTR  DISCHINH DISCHNW  DISCHTR  LCRET   
POSTBUSY POSTFREE RELOCATE VOICO    HTNW     PININT   TIMEDREM ATTR    
CPS      INCPRIO  CALOGOPT DIRCPCKP DCPA     CLIP     MOBHFA           
                                                                                
DEACTIVATED FEATURES                                                            
 
WTATND   RELCON   RERING   AUTOV    DCBB     DCBNOA   PINNW    ECFW    
XFBACALL XFBADIAL CDRE     NCT      RCCB     MLPP     CDRACC   SMARTCRD
SILMON                                                                 
AMO-FEASU-111       CUSTOMER FEATURE LIST                                       
DISPLAY COMPLETED;
  <*****  ***** AMO run time 00:00:01  *****

************************* RMX :  LOGOFF *************************

DIS-COT:1;

Code: 
********* RMX :  LOGON at 2023/07/15 13:11:20  ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 9084 ALLOCATED                         23-07-15 13:11:43
  <DIS-COT:1;  

DIS-COT:1;
H500:  AMO COT   STARTED
                                                                                
   COT:   1  INFO: XPRESSIONS SERVER           
   DEVICE: INDEP        SOURCE: DB                                              
   PARAMETER:
        PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE               PRI
        RECALL IF USER HANGS UP IN CONSULTATION CALL                  RCL
        TRUNK CALL TRANSFER                                           XFER
        TRUNK SIGNALING ANSWER                                        ANS
        KNOCKING OVERRIDE POSSIBLE                                    KNOR
        CALL EXTEND FOR BUSY, RING OR CALL STATE                      CEBC
        NETWORKWIDE AUTOMATIC CALLBACK ON BUSY                        CBBN
        NETWORKWIDE AUTOMATIC CALLBACK ON FREE                        CBFN
        REGISTRATION OF IMPLAUSIBLE EVENTS                            IEVT
        DON'T RELEASE CALL TO BUSY HUNT GROUP                         BSHT
        END-OF-DIAL FOR BLOCK IS SET                                  BLOC
        EMERGENCY OVERRIDE/DISCONNECT VIA S0/S2 LINE                  PROV
        ACTIVATE TRANSIT COUNTER ADMINISTRATION FOR S0/S2 LINE        ATRS
        CONNECTION TO ROUTE OPTIMIZATION NODE                         ROPT
        TSC-SIGNALING FOR NETWORKWIDE FEATURES (MANDATORY)            TSCS
        TRUNK SENDS CALL CHARGES TO ORIGINATING NODE NUMBER           TRSC
        CALL FORWARDING PROGRAMING FOR OTHER SUBSCRIBERS              CFOS
        CALL FORWARDING VALIDATION PROCEDURES POSSIBLE                CFVA
        PIN NETWORKWIDE POSSIBLE                                      PINR
        AOC PER CALL (AUTOMATICAL OR ON REQUEST), MAND. CORNET-NQ     AOCC
        AUTOM.DTMF CONVERSION ON INCOM.CALL WHILE IN TALK STATE       AMFC
        SEND DIGITS VIA IN.BAND DTMF BEFORE ANSWER                    IBBA
        NO TONE                                                       NTON
AMO-COT  -111       CLASS OF TRUNK FOR CALL PROCESSING                          
DISPLAY COMPLETED;
  <*****  ***** AMO run time 00:00:00  *****

************************* RMX :  LOGOFF *************************

*** HICOM-Nr: RMX  Contract:  Name:


Code: 
********* RMX :  LOGON at 2023/07/15 13:12:43  ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 9085 ALLOCATED                         23-07-15 13:13:06
  <REG-LDAT:1;  

REG-LDAT:1;
H500:  AMO LDAT  STARTED
ADD-LDAT:1,ALL,1,,4,1,10                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,1,1,1                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,11,1,11                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,12,1,12                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,13,1,13                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,14,1,14                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,15,1,15                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,16,1,16                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,17,1,17                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,18,1,18                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,19,1,19                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,20,1,20                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,21,1,21                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,22,1,22                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,23,1,23                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,24,1,24                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,25,1,25                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,26,1,26                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
ADD-LDAT:1,ALL,1,,27,1,27                      
,                                                        
,1,EMPTY,                                             
         WCHREG,        
         ,4,,,,                                     
         ,,,                   
,,,,,;
AMO-LDAT -111       LCR-DIRECTIONS                                              
REGENERATE COMPLETED;
  <*****  ***** AMO run time 00:00:01  *****

************************* RMX :  LOGOFF *************************

*** HICOM-Nr: RMX  Contract:  Name:
 
Upvote 0 Downvote
Nothing to do with CDR - but if you put in the line
CHA-FUNCT:REGIN=Y;
then your text outputs will be more readable
 
Upvote 0 Downvote
Thank you for your responses.
@sbcsu, can you please explain more the command you've provided. Which text will be more readable ?
@masviss, I've executed the commands I connected to the server using Telnet, nothing has been outputted, except dashes :
################################################################################
 
Upvote 0 Downvote
To receive data, you need to wait 1-2 minutes after an outgoing call.
And it's better to make a few calls and wait for an answer, talk a little.
Which device did you connect to for charging output?
Please show
DIS-SELS;
 
Upvote 0 Downvote
Hi @masviss,

Apologies for the delayed response; I was on vacation.

I've attempted multiple connections, waiting for over 20 minutes each time, yet no data has been outputted.

I established a connection with the following device: IP address 192.0.2.3, Port 1202.
Prior to making the changes, the device functioned flawlessly. However, after modifying the CDR format, I encountered a loss of data output.
Here outputed of : DIS-SELS;


Code: 
********* RMX :  LOGON at 2023/08/27 13:30:12  ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 1609 ALLOCATED                         23-08-27 13:30:34
  <DIS-SELS;  

DIS-SELS;
H500:  AMO SELS  STARTED
                                                                                
                    OPERATING CONDITIONS OF THE SELECTION GROUPS                
                                                                                
                    SELGRNO                 OPERATING CONDITION                 
 
                       1                        ON     
                       2                        ON     
                       3                        STOP   
                       4                        STOP   
AMO-SELS -111       SMDR/DMDR SELECTION GROUP SWITCHES                          
DISPLAY COMPLETED;
  <*****  ***** AMO run time 00:00:00  *****

************************* RMX :  LOGOFF *************************

*** HICOM-Nr: RMX  Contract:  Name:
 
Upvote 0 Downvote
You need to go back to the old CDR format.
What CDR format have you changed?
I suggest opening a new topic.
 
Upvote 0 Downvote
Hi

If the ash sysmbol is coming means the configurationand connectivity is good.

Please
exe-rest
type=unit
unit=A1
type of restart=soft;


and wait for two mineutes teh data will start dumping

dea-sels
act-sels

dea-lssm
act-lssm




sifrsifrthissawahidthissaqamsasifrsifrthissaarbasifrsabathalathasaba
 
Upvote 0 Downvote
Hi,
@masviss
I followed the instructions provided in this post (see complete commands at the end of the port): Link, and executed the recommended commands. However, after doing so, I noticed that I am no longer receiving CDR output. It's important to note that the client connection seems to be working fine, as indicated by the successful response from the command **DIS-LSSM**.

Is there a fundamental configuration for CDR that only provides basic call information?

@LAAZ, could you please confirm the correctness of the command ? I believe there should be no spaces in the parameters. I want to ensure that I don't inadvertently cause any issues to the server.

Thank you in advance.
 
Upvote 0 Downvote

Below is the output.
I noticed that format FTBL:14 is used by second server where output is mixed with system alarms/warnings.

REG-FTBL:1;

Code: 
*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 3018 ALLOCATED                         23-09-01 08:46:33
  <REG-FTBL:1;  

REG-FTBL:1;
H500:  AMO FTBL  STARTED
F03: FORMAT DOES NOT EXIST
AMO-FTBL -111       SMDR/DMDR TABLE FORMATS                                     
REGENERATE NOT COMPLETED;
  <*****  ***** AMO run time 00:00:05  *****

************************* RMX :  LOGOFF *************************

*** HICOM-Nr: RMX  Contract:  Name:


REG-FTBL:14;


Code: 
******** RMX :  LOGON at 2023/09/01 08:46:11  ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 3018 ALLOCATED                         23-09-01 08:46:33
  <REG-FTBL:1;  

REG-FTBL:1;
H500:  AMO FTBL  STARTED
F03: FORMAT DOES NOT EXIST
AMO-FTBL -111       SMDR/DMDR TABLE FORMATS                                     
REGENERATE NOT COMPLETED;
  <*****  ***** AMO run time 00:00:05  *****

************************* RMX :  LOGOFF *************************

*** HICOM-Nr: RMX  Contract:  Name: 
linux:/home/engr # 
linux:/home/engr # echo "REG-FTBL:14;  "| /opt/bin/dipas_batch
********* RMX :  LOGON at 2023/09/01 08:46:53  ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX  Contract: 00 Name: 

L01: LOGON ACCEPTED TSN 3019 ALLOCATED                         23-09-01 08:47:16
  <REG-FTBL:14;  

REG-FTBL:14;
H500:  AMO FTBL  STARTED
ADD-FTBL:14,B,FORM,1,N,"RECNO:#@@@ STARTED AT #@-#@-#@/#@:#@";
ADD-FTBL:14,B,CTRL,2,N,CR;
ADD-FTBL:14,B,CTRL,3,N,LF;
ADD-FTBL:14,B,FORM,4,N,"NO APPELANT      : #@@@@@@@@@@@      DESTINATION  ";
ADD-FTBL:14,B,FORM,5,N,"  : #@@@@@@@@@@@";
ADD-FTBL:14,B,CTRL,6,N,CR;
ADD-FTBL:14,B,CTRL,7,N,LF;
ADD-FTBL:14,B,FORM,8,N,"TRANSFERT PAR    : #@@@@@@@@@@@      DESTINATION  ";
ADD-FTBL:14,B,FORM,9,N,"  : #@@@@@@@@@@@";
ADD-FTBL:14,B,CTRL,10,N,CR;
ADD-FTBL:14,B,CTRL,11,N,LF;
ADD-FTBL:14,B,FORM,12,N,"TYPE D'APPEL    : #@@@@@@@@      DUREE SONNERIE : ";
ADD-FTBL:14,B,FORM,13,N,"#@@@";
ADD-FTBL:14,B,CTRL,14,N,CR;
ADD-FTBL:14,B,CTRL,15,N,LF;
ADD-FTBL:14,B,FORM,16,N,"NO JONCTION     : #@@@@@@@@@     IDENT. ABONNE  : ";
ADD-FTBL:14,B,FORM,17,N,"#@@@@@";
ADD-FTBL:14,B,CTRL,18,N,CR;
ADD-FTBL:14,B,CTRL,19,N,LF;
ADD-FTBL:14,B,FORM,20,N,"DEBUT DE L'APPEL: #@:#@:#@.#     FIN DE L'APPEL : ";
ADD-FTBL:14,B,FORM,21,N,"#@:#@:#@.# ";
ADD-FTBL:14,B,CTRL,22,N,CR;
ADD-FTBL:14,B,CTRL,23,N,LF;
ADD-FTBL:14,B,FORM,24,N,"***RECORD-END***";
ADD-FTBL:14,B,CTRL,25,N,CR;
ADD-FTBL:14,B,CTRL,26,N,LF;
ADD-FTBL:14,B,CTRL,27,N,LF;
ADD-FTBL:14,B,CTRL,28,N,LF;
ADD-FTBL:14,B,CTRL,29,N,LF;
ADD-FTBL:14,B,CTRL,30,Y,LF;
ADD-FTBL:14,B,FIELD,1,RECNO,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,2,STYEAR,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,3,STMONTH,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,4,STDAY,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,5,STHOUR,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,6,STMIN,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,7,CHRGEE,CHAR," ",L;
ADD-FTBL:14,B,FIELD,8,CALLEPTY,CHAR," ",L;
ADD-FTBL:14,B,FIELD,9,TRNSFPTY,CHAR," ",L;
ADD-FTBL:14,B,FIELD,10,DESTPTY,CHAR," ",L;
ADD-FTBL:14,B,FIELD,11,CONNTYPE,CHAR," ",L;
ADD-FTBL:14,B,FIELD,12,RINGDUR,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,13,TKNOLIST,CHAR," ",L;
ADD-FTBL:14,B,FIELD,14,STNID,CHAR," ",L;
ADD-FTBL:14,B,FIELD,15,STHOUR,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,16,STMIN,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,17,STSEC,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,18,ST10,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,19,ENDHOUR,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,20,ENDMIN,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,21,ENDSEC,CHAR,"0",R;
ADD-FTBL:14,B,FIELD,22,END10,CHAR,"0",R;
AMO-FTBL -111       SMDR/DMDR TABLE FORMATS                                     
REGENERATE COMPLETED;
  <*****  ***** AMO run time 00:00:01  *****

************************* RMX :  LOGOFF *************************

*** HICOM-Nr: RMX  Contract:  Name:
 
Upvote 0 Downvote
DEA-SELS:2;
CHA-SELG:TBL=SELT,SELGNO=2,SELTABNO=1,FORMBAS=FORM14;
ACT-SELS:2;
 
Upvote 0 Downvote
Thank you, @masviss, for your assistance.

I have successfully managed to retrieve CDR output from port 1202. However, I have encountered a rather perplexing behavior: the CDR transmission halts after processing around 100 to 200 records. Despite waiting for hours in anticipation of new data, none is received. This remains the case even if I reestablish a connection using the same port (1202).

Interestingly, the data flow resumes only when I connect to port 1201 (and not 1202) initially, allowing some data to accumulate (presumably CDR records). After this, when I subsequently reconnect to port 1202, I am able to retrieve a limited number of records.

Adding to the complexity of the issue, all the data being received originates from June 2023; no recent data is being transmitted.

Could you please provide insight into the potential cause of this issue?

Best regards.
 
Upvote 0 Downvote
Maybe there is a previous post on here
telling you not to use two outputs, to deactivate sels 1. Ah, yes there is, from nearly two months ago.
 
Upvote 0 Downvote
To delete all the old data if this data is not needed
and start receiving data from this point in time,
run these commands:

DEA-SELS:1; this suggested by Moriendi
DEA-SELS:2;
DEL-DAGR:CDRC1;
DEL-DAGR:CDRC2;
ADD-DAGR:CDRC1,65000;
ACT-SELG:2;

I warn you that it is not recommended
to turn off data reception from DR for a long time.
If the data reception buffer overflows, the PBX will restart.
If you still need to turn off data reception, then turn off SELG
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

kritsadadetc
  • Question
OpenScape 4000 Internal Call CDR
Replies
4
Views
217
kritsadadetc
kritsadadetc
Delcow
  • Locked
  • Question
CDR Output
Replies
1
Views
80
Moriendi
Moriendi
jarmac
  • Locked
  • Question
OpenScape 4000V10 CDR - local UNANSWERED calls are missing in CDR
Replies
5
Views
215
jarmac
jarmac
Nasredine
  • Locked
  • Helpful tip
Enhanced SmartPBX Solutions for HiPath: Comprehensive stations control and CDR Management
Replies
0
Views
106
Nasredine
Nasredine
LAAZ
  • Locked
  • Question
OSB_V3 netwoked system no voice
Replies
0
Views
60
LAAZ
LAAZ

Part and Inventory Search

Sponsor

Back
Top