No CDR output

[Nasredine]

Hi,
I'm trying to activate CDR. I'm not the one that has configure it before, so I'm not sure if it was done properly.
When I execute : DIS-LSSM; I've the server activated but when I try to log into it to get records using SSH or Telnet, I got timeout error.
Any help.

********* RMX : LOGON at 2022/12/16 08:46:46 ONLINE BATCHPROCESSING ********

*** HICOM-Nr: RMX Contract: 00 Name:

L01: LOGON ACCEPTED TSN 3226 ALLOCATED 22-12-16 08:47:07
<DIS-LSSM;

DIS-LSSM;
H500: AMO LSSM STARTED

+=========================================================================+
| STATE OF LAN - CHANNELS |
+=========================================================================+
| | | SYSTEM | USER |
| TCP- | STATE |=========================================================|
| LINE | | IP ADRESS | PORT | IP ADRESS | PORT |
+=========================================================================+
| 1 | ON | 192.0.2.3 | 1201 | 0.0.0.0 | 0 |
| 2 | ON | 192.0.2.3 | 1202 | 0.0.0.0 | 0 |
| 3 | OFF | 0.0.0.0 | 0 | 0.0.0.0 | 0 |
| 4 | OFF | 0.0.0.0 | 0 | 0.0.0.0 | 0 |
| 5 | OFF | 0.0.0.0 | 0 | 0.0.0.0 | 0 |
| 6 | ON | 192.0.2.3 | 1206 | 0.0.0.0 | 0 |
+=========================================================================+

AMO-LSSM -111 LINE SWITCH, SERVICE MODULES
DISPLAY COMPLETED;
<***** ***** AMO run time 00:00:01 *****

************************* RMX : LOGOFF *************************

*** HICOM-Nr: RMX Contract: Name:

 

[Nasredine]

After only executing "DEA-SELS:1.", the transmission of data flow commenced; however, only a partial amount of data was transmitted, omitting the records from July.

@masviss, could you clarify whether this command has the potential to result in overflow issues? If it does, kindly provide the command necessary to deactivate SELG.

Best regards.

 

[masviss]

The command
DEA-SELS:X;
only disables data transfer in the storage area,
from where this data can then be read.

The command
ACT-SELS:X;
turns on the transmission.

That is, if the SELS is activated, the data is recorded
and occupies a dedicated storage space.
After reading the data, they are deleted.

 

[Nasredine]

Thank you; it works now.