Have an IP Office 500 system setup and working just fine...
About 10-20% of the time when a user dials a call, half way through dialing they get the tone you get as if you didn't dial 9 to start the call, yet they did start with a 9...there is a free line available so that is not the issue...
What setting might fix this problem or what might I look for in the Monitor.
Thanks for all your help,
Matthew
About 10-20% of the time when a user dials a call, half way through dialing they get the tone you get as if you didn't dial 9 to start the call, yet they did start with a 9...there is a free line available so that is not the issue...
What setting might fix this problem or what might I look for in the Monitor.
Thanks for all your help,
Matthew