I accessed the web based management, and tried to give the call pilot a new IP address, I entered the local gateway address and the DNS server, which is across a permenant VPN on a different subnet.
I received an error message stating that I had to give it a FQDN if DNS was used. I gave it a FQDM of VMAIL.DOMAINNAME.local, thinking that DNS would pick up the IP Address allocated by DHCP (Provided at the local gateway)
Now the CAll pilot will not start, and I get "FEATURE INNACTIVE" when I try to access any of the Voicemail features.
When I reboot the lights flash for a while and then go dead.
I have Tried the connect with a crossover cable with no success. I have also tried to connect by serial cable using hyperterminal (VT100/ASCII etc) and all I get is unrecognizable characters.
PLEASE HELP!
I received an error message stating that I had to give it a FQDN if DNS was used. I gave it a FQDM of VMAIL.DOMAINNAME.local, thinking that DNS would pick up the IP Address allocated by DHCP (Provided at the local gateway)
Now the CAll pilot will not start, and I get "FEATURE INNACTIVE" when I try to access any of the Voicemail features.
When I reboot the lights flash for a while and then go dead.
I have Tried the connect with a crossover cable with no success. I have also tried to connect by serial cable using hyperterminal (VT100/ASCII etc) and all I get is unrecognizable characters.
PLEASE HELP!