Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MXe LAN port drop after system boot 15min

Status
Not open for further replies.

Vitowan

Technical User
Sep 16, 2012
3
CN
Hello

MITEL 3300icp LAN port drop after system boot 15min, all the Ip phone can't work.
But ASUII and the on board (6co+4ext) analog phones working fine.
BTW. Before the E2t card are installed, the system will automatic reboot while the LAN dropped after 20 min.

Vitowan
 
it looks that your LAN port has got Vlans...

Connect to the RS232 port and issue the following commmand:

vlan_off

This will clear any Vlan tagging on the LAN port.

After you login you must go to IP properties and clear the Vlan ID, otherwise the vlan tagg will come back everytime you reboot

try and let us know what happpened

 
Thanks Danramirez,

The LAN port resume working now. And also replace the switch.
Thank you very much.

Vitowan
 
I've seen similar symptoms with IP conflicts

I was not aware the Vlan setting only kicked in at a later time

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top