Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multitech Fax Finder and the IPO

Status
Not open for further replies.

aarenot

Vendor
Aug 30, 2003
2,383
US
Has anyone had issues with specific IPO releases and the FF100, or FF200. I am at 3.1.48, and wondered if an upgrade would help this. The FF uses an analog ext to connect to the IPO, ans LAN for SENDIND FAX VIA em ATTACHMENT THRU smtp.

You do not always get what you pay for, but you never get what you do not pay for.
 
hAVE YOU USED IT ON ipo RELEASE 3.1.48? Or any others, if so, what releases, if you recall?

Thanks, by the way for your response.

You do not always get what you pay for, but you never get what you do not pay for.
 
We have FaxFinders working properly on both 3.1.48 and 3.1.65.

Mark
 
I am running 1 FF100 and 1 FF200 on IPO 3.1(65) and both work great from an IPO perspective. The FF interface has 1 problem I am aware of. Here is the problem we have experienced. If you have enough users in the FF100 interface when you look at page 2 of your list of users the 1st user on page 2 will have a password conflict with the 1st user on page 1. Our solution was to enter a bogus user on page 2 and move on. The specific problem is the password field on both pages are somehow linked together.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top