Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel 3300 w/ Embedded VM - 2 Company - separate night greeting control

Status
Not open for further replies.

skibby1981

Technical User
Jun 29, 2011
31
CA
I have two companies on an embedded voice mail. Is it possible to have each company night greeting change at different times?

I have split the voice mail ports for each company.
Ports 1-8 using primary greeting set 1 with all 8 ports in tenant 1 and night service leader for tenant 1 is 1.
Ports 9-12 using alternate greeting set 2 with ports 9-12 in tenant 2 and night service leader for tenant 2 is 2.
When I change tenant 1 into day mode, I can see its only changing tenant 1 into day mode. Tenant 2 still shows in night mode 1. However, when I call the tenant 2 voice mail hunt, it is also switched into day mode.

Is it possible to have separate night control for voice mail ports?

Running MCD 5.0 SP2.

Thanks.
 
I don't think you can tenant the VM ports

Do you need dial by name?
Do you need dial by extension?

There are other options such as:

faq1329-6743

**********************************************
What's most important is that you realise ... There is no spoon.
 
Yeah. I've done it the menu node way before. Not a huge fan of it. Exact reasons you questioned. Just hoping maybe I was just missing something using this setup. Pros and cons each way I guess. Thanks for the input.
 
If you need DBN then you're out of luck I think

Dial by extension can be achieved with a standard MB

I never use Menu Nodes as Auto-Att, only for Menu Trees.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Yeah. I don't think standard mailboxes can time out to an attendant. Unless you know a way. If not, no worries though. Can't cover every angle. If they really want to they can go nupoint. Thanks again.
 
We were talking night mode so I didn't think timing out to an attendant would be important.

I terminate the calls to teh General MB with the option to Dial by ext or wait to leave a message.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Yeah. Day mode the AA is backup. I guess the day message can say dial 0 for immediate assistance otherwise stay on line to leave message. Genius. Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top