I have just installed a MIRAN 3 in a CS1000 v5.5 lab system. Routes and trunks seem to be correct as the MIRAN is operational. However, when I access the MIRAN from a phone, the recordings or prompts from the TUI have a fair bit of static. The audio is not as clear as I would have expected. This includes the TUI prompts that were included by Nortel, so I am certain its not an issue with the audio files. I've tried to disable the card, reseat, then re-enable, but it doesn't seem to resolve the problem. The curious thing is that the amount of static seems to vary between calls.
Below is the details for the DID route to the MIRAN (for TUI)
And below is the trunk detail:
I've seen several posts about static with a MIRAN, but it seems the were dealing with only hearing static. I can certainly hear the prompts, but they are mixed with static. Does anyone have any suggestions on how this could be corrected?
Thanks!
==================================
<INSERT SIGNATURE HERE>
Below is the details for the DID route to the MIRAN (for TUI)
Code:
TYPE: rdb
CUST 0
ROUT 127
TYPE RDB
CUST 00
DMOD
ROUT 127
DES MIRAN7
TKTP DID
M911_ANI NO
M911_TONE NO
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
PTYP ACO
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB NO
STEP
ACOD 4888
CPP NO
TARG
CLEN 1
BILN NO
OABS
INST
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
IENB 5
VSS 0
VGD 6
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
VRAT NO
MUS NO
MR NO
MANO YES
EQAR NO
OHQ NO
OHQT 00
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO
And below is the trunk detail:
Code:
DES MIRAN7
TN 008 0 00 07
TYPE DID
CDEN 8D
CUST 0
XTRK EXUT
FWTM NO
TIMP 600
BIMP 3COM
AUTO_BIMP NO
TRK ANLG
NCOS 0
RTMB 127 1
NITE
SIGL LDR
STRI/STRO IMM IMM
SUPN NO
AST NO
IAPG 0
CLS UNR DIP CND ECD WTA LPR APN THFD SPCD
P10 NTC
TKID
AACR NO
I've seen several posts about static with a MIRAN, but it seems the were dealing with only hearing static. I can certainly hear the prompts, but they are mixed with static. Does anyone have any suggestions on how this could be corrected?
Thanks!
==================================
<INSERT SIGNATURE HERE>