Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS won't boot with UK software

Status
Not open for further replies.

Midas67

Technical User
May 13, 2006
14
CA
I repair Companion phones and have installed a UK sofware cartridge and a UK base station in my North American Norstar MICS system. Can anyone tell me why it won't boot up?
Thanks
 
Can you tell me what your software cartridge is. I have a list of the different UK Norstar software versions. Is your system a 8+24 or 0+32 etc?.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
The UK software cartridge is NT7B72AA-93 which is supposed to support the Companion phones. The MICS is NT7B53FA-93 which has 2 trunk cards installed.
 
Is it a single cartridge that sits in the CPU?. Is there a software ID code such as 30nDI15,30HjD04,30HvG00 ,30HvG09,30HvG10 or 30HvG13 etc?.

I have a list of most UK Norstars that have this type of identification.


All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
I've checked my Excel sheet, and you have a Modular 0+32 Norstar system SP:30nDI15 DR6. This system version was the first 0+32 issue that was released. It also uses the DASS digital lines The software release is 8.15 & it was issued in Jan 1995.

Are you aware that UK power supplies uses 240 Volts?. I'm assuming that you have the cartridge inserted in your own Norstar CPU, running 110 Volts?.

I would have thought that it should still load up OK.


All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
It is a 110 volt system although I don't see why this should make any difference. I have heard from another North American telecom business that they had the same problem when attempting to use UK software in their MICS.
 
I must admit that I find it very odd that you can't load up the software contained within the cartridge. I've got a American Norstar 6+16 cartridge, so I'll try next week to put it into my own test UK 6+16. I've got some pdf files if you want to contact me.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Thanks so much for your efforts. What do the pdf files refer to?
 
What I really need to know is if I have to buy a complete UK MICS system to make it work here.
 
That is a good question. I was wondering if there were any switch type settings inside the CPU. I know that you should never take one apart, but there could be something inside that is specific to N/A or UK etc.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
The question that I really should be asking you is, do you think there is a market for the repair of Companion phones in the UK?
 
I normally work on the Nortel Option / Succession range of switch's. We are finding that customers are having their Companion systems taken out these days & some are now using the later DECT range, or some are going to a different supplier. The Companion range has been discontinued by Nortel for around 2 years now. My Company has a limited mntce supply of the 3050 phones. I don't think that it would be worth it trying to repair them over here.
Are there many Companion systems in N/A?.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top