MICS PRI Enabler Code

[rkartevold]

Other than turning up a PRI (Circuit) and plugging it into the MICS, is there any way to tell if an Enabler Code has been installed? I'm being handed an MICS (7.0) with DTI and Combo Card (Used System) and the owner says that it had a PRI before. Anything in the Programming to get me to the point of telling PRI Code is there?

 

[DSLT1]

as long as you can change the card to PRI under hardware settings
you have to disable the card first
if you cant change to pri then there is no enabler code

 

[DSLT1]

If the sytem has pri code alreay you will also lose the code if you do a F**Startup or down size the system

 

[rkartevold]

Under hardware it shows cd-1: KSU PRI so I guess it's OK. Thanks for the tip. It's one I won't forget.