Progran Resource Manager[ARG=""]
Node 1 Ver1.0 (MM13)
Prm(Info): Using Software Volume: BOOT100:
PRM Waiting for Seer Server to register
PRM Set MMBlock: DoShutMMSet to false 0
PRM INIT System: MaxProgs calculated to be 50
PRM Audit: Audit task is up
PRM: INIT System: Starting vs node 1 prog 0 sibling -1
PRM: doing Fox security check
We had a similar prob we did the following excercise
If AML link is down or not establishing then MM will hang at this point.
If AML link is down,just come out of LD 48 & log out of the PABX till u get a message AMLXXX on the terminal.
If Still there is no improvement then manually disable AML in ld 48 & enable as auto recovery ( i forgot actual command).
Then restart the Meridian Mail.
you can't check the dongle. mermail has a dongle, security arrangement. it has to match the keycodes. after the mail sees that in place it should boot into service. if it fails you should get a mismatch error.. looks like a large watch battery, goes on the mmp 40
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.