Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Initialize Program
The Initialize Program momentarily interrupts call processing as it clears
common equipment faults. It then rebuilds call-dependent data and
generates system messages, with the mnemonic INI, that indicate the status
of the system. This process is called an initialization.
Through an initialization, firmware can be downloaded from the CPU to
superloop network cards and controller cards. Call processing is interrupted
for an additional amount of time during this process.
An initialization can be activated by pressing the manual initialize (Man
Int) button on the following:
• NT6D66, NT9D19, NT5D10, or NT5D03 Call Processor Card
An initialization always occurs automatically after the System Loader
program runs. An initialization often occurs when a software or firmware
fault is detected and when a common equipment hardware fault is detected.