Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Key Expansion Module

Status
Not open for further replies.

chiacomo

IS-IT--Management
Jul 9, 2004
103
US
I tried to add a Key Expansion Module to a 2616 telephone. Added AOM 1 and plugged up the cable. I can define the buttons (of course), but the module itself isn't working.

The module works on another phone with an existing KEM. The phone and module work together on another TN with an existing KEM. Is there something in translations I'm missing? Do I need to set a permission somewhere or do something other than AOM 1?

Thanks so much!
 
IT MAY REQUIRE A POWER SUPPLY AND A DAUGHTER BOARD DEPENDING ON THE RELEASE OF THE 2616

OLD ROLMEN WORKING ON NORTELS
 
no, that is the only prompt.. does that station and aom work on another jack. the older version sets had to have an external power supply.. plugged in at the jack

john poole
bellsouth business
columbia,sc
 
If the 2616 is a RLS 1, then you will need to power supply.
 
I figured it might require external power. Is there a way to "status" the phone and determine what release it is?
 
You will see something like;
NNTM6083E459
NT9K16AC35
REL #02
 
ARIES TN 012 0 09 10
TN ID CODE: M2616
NT CODE: NTZK16BA
COLOR CODE: 03
RLS CODE: 21
SER NUM: C36C33

RLS 21 sounds like something other than RLS 1 -- so, external power?
 
Did the TN that you said it worked on have an external power supply? Also if it does require external power make sure that you use a 6 conductor line cord because the power comes in on pins 1 and 6.
 
The TN that worked did not have an external power supply. Both stations are connected using a six conductor cord.

This is the phone that works:
[tt]ARIES TN 012 0 06 11
TN ID CODE: M2616
NT CODE: NT9K16AC
COLOR CODE: 03
RLS CODE: 03
SER NUM: 9BA568[/tt]

This is the phone that doesn't work (on its own TN):
[tt]ARIES TN 012 0 09 10
TN ID CODE: M2616
NT CODE: NTZK16BA
COLOR CODE: 03
RLS CODE: 21
SER NUM: C36C33[/tt]

Could it be the port that it's connected to? Any other thoughts? I'm at a loss, really.
 
The RLS 21 needs the power supply. RLS 03 is newer style. Has the module ever worker on teh RLS 21 phone? If so, the powersupply could be located somewhere in your switchroom.
 
The vintage NT9K16 is one of the latest vintages for a 2616 that doesn't require a power supply.

The NTZK16BA are the original M2616 phones which are very common for anyone who installed sets prior to 1996. You will need power for this vintage.
 
The NTZK phones provide all the basic
functionality and benefits of the Meridian sets. These phones require a
power board and transformer when adding an NT2K22 add-on module, so if
you don't need the extra 22 buttons and a basic display meets your needs,
this is a great phone for you.


NTZK16CA
 
I have a 2616 programmed with a key expansion module. The programming is below. The user sees/hears the phone ring when the lines programmed on the module ring, and the module definitely has power, but the user cannot answer the lines when she presses the ringing button. Is there some sort of privacy setting preventing her from answering the lines on her expansion module? I've never heard of this if the DNs are programmed as SCRs, and the call is not already in progress.

DES 4
TN 004 1 01 00
TYPE 2616
CDEN 8D
CUST 0
AOM 1
FDN 1522
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA ADD HFA
MWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD DDV CNID CDCA
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD PGND OCBD FLXD FTTC
CPND_LANG ENG
RCO 0
HUNT 1522
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 1316 0 MARP
CPND
NAME BRENDA DAVIS
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 4316 0 MARP
CPND
NAME BRENDA DAVIS
XPLN 27
DISPLAY_FMT FIRST,LAST
02 TRN
03 AO6
04 CFW 4 1522
05 ADL 16
06 ADL 16
07
08 MWK 1522
09 ADL 16
10 ADL 16
11
12 ADL 16 918004726473
13 ADL 16 917133191453
14 ADL 16 92146681913
15
16 SCR 1537 0
CPND
NAME CONNOR DUFFEY
XPLN 27
DISPLAY_FMT FIRST,LAST
17 SCR 1565 0
CPND
NAME CONNOR DUFFEY
XPLN 27
DISPLAY_FMT FIRST,LAST
18 SCR 1584 0
CPND
NAME DEAN ROSENCRANS
XPLN 27
DISPLAY_FMT FIRST,LAST
19 SCR 3484 0
CPND
NAME BILL MCCOY
XPLN 27
DISPLAY_FMT FIRST,LAST
20 SCR 1585 0
CPND
NAME JOHN PELOUBET
XPLN 27
DISPLAY_FMT FIRST,LAST
21 SCR 3585 0
CPND
NAME JOHN PELOUBET
XPLN 27
DISPLAY_FMT FIRST,LAST
22 SCR 4082 0
CPND
NAME STEVE CHRISTOPHER
XPLN 27
DISPLAY_FMT FIRST,LAST
23 SCR 5082 0
CPND
NAME STEVE CHRISTOPHER
XPLN 27
DISPLAY_FMT FIRST,LAST
24 SCR 1546 0
CPND
NAME ALI YASSINE
XPLN 27
DISPLAY_FMT FIRST,LAST
25 SCR 3646 0
CPND
NAME ALI YASSINE
XPLN 27
DISPLAY_FMT FIRST,LAST
26
27 SCR 1517 0
CPND
NAME JOHN JOHNSON
XPLN 27
DISPLAY_FMT FIRST,LAST
28 SCR 3317 0
CPND
NAME JOHN JOHNSON
XPLN 27
DISPLAY_FMT FIRST,LAST
29 SCR 1308 0
CPND
NAME Deborah Woodley
XPLN 27
DISPLAY_FMT FIRST,LAST
30 SCR 1208 0
CPND
NAME Deborah Woodley
XPLN 27
DISPLAY_FMT FIRST,LAST
31 SCR 1311 0
CPND
NAME ED DOODY
XPLN 27
DISPLAY_FMT FIRST,LAST
32 SCR 1411 0
CPND
NAME ED DOODY
XPLN 27
DISPLAY_FMT FIRST,LAST
33 SCR 1302 0
CPND
NAME KIMBERLY CHU
XPLN 27
DISPLAY_FMT FIRST,LAST
34 SCR 1202 0
CPND
NAME KIMBERLY CHU
XPLN 27
DISPLAY_FMT FIRST,LAST
35
36
37
DATE 4 MAY 2007
 
SORRY - I thought I was starting a new thread! Let me try again...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top