IP Office to Definity H.323 Audix

[chrismac52]

I have a definity S8300 with G700 gateway connected to IPO 406v2 h.323 QSIG. I am trying to set the IPO up to use the Audix conencted to the definity. When audix answers it tells me to enter the extension I am leaving a message for instead of going straight to the mailbox. Any ideas?

 

[dizzyphil]

you can also view your voip lines to see the extension of the IP Office.

 

[chrismac52]

If I disp node-names audix i have audix 192.168.1.70

If I disp nodes-names IP i have:
default 0.0.0.0
ecas 192.168.1.74
ip office 192.168.2.17
procr 192.168.1.64

The reason I asked about the way I have the calls routed, is I got "Creative" when doing it and that might be the problem. I have 3 set to access AAR and then I have VDNs pointing to extensions. For example I have a VDN of 708 that points to 3 708. Maybe this is the problem?

 

[dizzyphil]

Think your right. Redo it and test. Let me know.

 

[chrismac52]

How do I need to set this up?

 

[chrismac52]

Phil, if you can give me any insight on setting the routing up properly, I would really appreciate it! That might just be what I need to solve the problem!