Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office server Error

Status
Not open for further replies.

Bonker1974

Technical User
Oct 11, 2011
357
BS
Hi All,
I have an Issue I setting up a IP Office server edition 9.1 I have added 8 expansions (IP Office 500v2) with not a problem.
I added 2 additional expansion with no problem. However when I exit out of the manager and try to connect to the IP Office server I get an error " Some System configurations could not be loaded online. Do you wish to load the stored configuration for these systems offline.

I have tried 2 other (IP Office 500v2) and go the same error.

Any help would be great.
 
You can't reach the IPs of these nodes from your computer.
 
Yes I can reach the IP.
That what have me puzzle. I can login to nodes individually with no problem. However, If I try login from the server IP that's where i get problem.
 
Your computer will try to connect to the IPs that are configured as SCN trunk opposite IPs. So I assume you are able to connect for example to the LAN1 IPs but used LAN2 interfaces to link the IPOs with the server.

You can enable SE centralized access in Manager options but you will lose since features then.
 
Do you show the IP trunks built between the remote and the Server? I have seen that sometimes the trunks are not configured automatically when you add expansion and have had to add them manually.

 
Make sure you disable your wireless connection if you're using a laptop to connect.
 
@ Nystech- The IP Trunks are configured.

@ Flyguy2- Wireless are disable
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top