Looking for some assistance. We have 2 IPOs on 9.1.3 connected over SCN which has been working for years. Customer is now asking to be able to Park Calls between sites. The Call Parks on both systems on the button programming are setup the same with the action data being 201, 202, 203. In the park/page settings we have 2xx setup. From everything I see, there should be no issues parking between sites but site 2 Park keys do not light when a Call is parked on site 1. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Office Call Parking over SCN
- Thread starter tmcd123
- Start date
Could try upgrading both sides to R9.1.12 as early releases of R9.1 were not so great.
How is the SCN line setup is it proprietary or websocket? If proprietary try websocket I find it tends to work better.
The truth is just an excuse for lack of imagination.
How is the SCN line setup is it proprietary or websocket? If proprietary try websocket I find it tends to work better.
The truth is just an excuse for lack of imagination.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question