Romeo0ttis
Programmer
I need to know what is needed to hook up 2 remote phones to a IP Office 500 it has embedded and is in standard mode with 10 1416's. I would appreciate any help. The IT guy said he could build the vpn's.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Office 500 Remote phones or soft phone requirments
- Thread starter Romeo0ttis
- Start date
- Status
Well...if they are just going to be sitting on a VPN, then all you would need is an IP endpoint license and they would act like any other IP phone.
If you plan on making your IP phones into *VPN* phones...thats another can of worms.
-Austin
ACE: Implement IP Office
If you plan on making your IP phones into *VPN* phones...thats another can of worms.
-Austin
ACE: Implement IP Office
- Thread starter
- #3
Romeo0ttis
Programmer
So are you saying that the customer would only need to purchase 2 ip phones and the ip end point license. Just to be clear all they have now is ip office 500 v2 with 2 combo cards and embedded voice mail they are using 8 pots lines.
For IP phones you need VCM channels which are on the combocards (10 eachs)
You need IP endpoint licenses per phone and you need IP phones.
BAZINGA!
I'm not insane, my mother had me tested!
www.lantel.nl
You need IP endpoint licenses per phone and you need IP phones.
BAZINGA!
I'm not insane, my mother had me tested!
www.lantel.nl
- Status
Similar threads